Effects of Atomization Parameters on the Powder Granularity and Distribution of H70 Brass

Li Yong Wang Huasheng Han Deqiang

Views : 0 下载量: 111 CSCD: 2

Export
Share
Collection
Album

Effects of Atomization Parameters on the Powder Granularity and Distribution of H70 Brass
Issue 7, Pages: 444-446(2005)
Published： 2005 ，
DOI：

扫描看全文

[1]李勇,王华生,韩德强.雾化参数对H70黄铜粉末粒度及其分布的影响[J].特种铸造及有色合金,2005(07):444-446+384.

Li Yong Wang Huasheng Han Deqiang. Effects of Atomization Parameters on the Powder Granularity and Distribution of H70 Brass. [J]. Special Casting & Nonferrous Alloys (7):444-446(2005)
[1]李勇,王华生,韩德强.雾化参数对H70黄铜粉末粒度及其分布的影响[J].特种铸造及有色合金,2005(07):444-446+384. DOI：

Li Yong Wang Huasheng Han Deqiang. Effects of Atomization Parameters on the Powder Granularity and Distribution of H70 Brass. [J]. Special Casting & Nonferrous Alloys (7):444-446(2005) DOI：

摘要

气雾化生产金属粉末是一个复杂的过程

影响因素较多。为制备较细粉末需求最佳的工艺参数组合

应用气体动力学和流体力学分析了雾化气体压力、金属熔体温度和导液管内径对H70黄铜雾化粉末粒度及其分布的影响。结果表明:适当地提高气体压力和金属熔体温度或者减小导液管内径均能使雾化粉末粒度增大

当雾化气体压力为1.3MPa

金属熔体温度为1160℃时

导液管内径为3.5mm时

所制得的粉末的粒度及其分布均达到最佳效果。

Abstract

The production of metal powder by gas atomization is complicated

whose process was influenced by many factors.Effects of pressure and temperature on the powder granularity and distribution of H70 brass were analyzed based on gas kinetics and hydrodynamics.Results showed that powder granularity can be increased with the increase of the gas pressure and melt temperature.The optimized powder granularity and distribution effects can be obtained with melt temperature of 1 160 ℃ and atomized pressure of 1.3 MPa.