Microstructure and Mechanical Properties of Cast Cu-15Ni-8Sn Alloy

Zhang Shaozong; Jiang Bohong; Ding Wenjiang

Views : 0 下载量: 236 CSCD: 8

Export
Share
Collection
Album

Microstructure and Mechanical Properties of Cast Cu-15Ni-8Sn Alloy
Issue 1, Pages: 62-64(2006)
Published： 2006 ，
DOI：

扫描看全文

[1]张少宗,江伯鸿,丁文江.铸造Cu-15Ni-8Sn合金的组织和力学性能[J].特种铸造及有色合金,2006(01):62-64+1.

Zhang Shaozong, Jiang Bohong, Ding Wenjiang. Microstructure and Mechanical Properties of Cast Cu-15Ni-8Sn Alloy. [J]. Special Casting & Nonferrous Alloys (1):62-64(2006)
[1]张少宗,江伯鸿,丁文江.铸造Cu-15Ni-8Sn合金的组织和力学性能[J].特种铸造及有色合金,2006(01):62-64+1. DOI：

Zhang Shaozong, Jiang Bohong, Ding Wenjiang. Microstructure and Mechanical Properties of Cast Cu-15Ni-8Sn Alloy. [J]. Special Casting & Nonferrous Alloys (1):62-64(2006) DOI：

摘要

研究了铸造Cu-15Ni-8Sn合金时效过程中组织和力学性能的变化规律。固溶处理获得的单相α固溶体经适当的时效热处理会产生Spinodal调幅结构

亚稳态γ′相

以及不连续沉淀γ相。伴随着组织的变化合金的力学性能也相应发生变化

时效初期合金的强度和硬度随时效时间的延长或温度的升高而升高

而经过最大值后

则随时间的延长或温度的升高而下降;时效过程中合金塑性变化规律与强度和硬度规律相反。

Abstract

Effects of ageing treatment on microstructure and mechanical properties of cast Cu-15Ni-8Sn alloy were investigated. It is found that with ageing at 400 癈

the supersaturated solid solution a is firstly decomposed spinodally

then the metastable ?’ precipitated phase appears after spi-nodal decomposition

and thereafter discontinuous precipitation ? phase occurs in grain boundary. The microstructure transformation process affects the mechanical properties of the alloy with ageing treatment. Tensile strength

yield strength and hardness of the alloy are gradually increased to a peak value （formation of meatstable ?’precipitated phase ） earlier

then is decreased with increasing the ageing time or temperature. Fracture toughness of the alloy is severely impaired due to the grain boundary precipitates.