Effects of Pulse Electric Current on Directional Solidification Structure of Al-4.5Cu Alloy

Chen Wenjie; Liao Xiliang; Gan Changhong; Fang Yan; Zhai Qijie

Views : 0 下载量: 306 CSCD: 5

Export
Share
Collection
Album

Effects of Pulse Electric Current on Directional Solidification Structure of Al-4.5Cu Alloy
Issue 8, Pages: 523-525(2006)
Published： 2006 ，
DOI：

扫描看全文

[1]陈文杰,廖希亮,甘长红,方燕,翟启杰.脉冲电流对Al-4.5Cu合金定向凝固组织的影响[J].特种铸造及有色合金,2006(08):523-525+463.

Chen Wenjie, Liao Xiliang, Gan Changhong, et al. Effects of Pulse Electric Current on Directional Solidification Structure of Al-4.5Cu Alloy. [J]. Special Casting & Nonferrous Alloys (8):523-525(2006)
[1]陈文杰,廖希亮,甘长红,方燕,翟启杰.脉冲电流对Al-4.5Cu合金定向凝固组织的影响[J].特种铸造及有色合金,2006(08):523-525+463. DOI：

Chen Wenjie, Liao Xiliang, Gan Changhong, et al. Effects of Pulse Electric Current on Directional Solidification Structure of Al-4.5Cu Alloy. [J]. Special Casting & Nonferrous Alloys (8):523-525(2006) DOI：

摘要

研究了脉冲电流对Al-4.5Cu合金定向凝固过程及组织的影响。结果表明

随着脉冲电流峰值和频率的增大

Al-4.5Cu合金柱状晶被熔断

形态由细条状变为不连续

失去其定向凝固的取向性;且柱状晶间距随电流峰值和频率的增大而减小。由脉冲电流的引入而产生的脉冲磁压力及焦耳热效应在固液界面处造成的强烈扰动是定向凝固组织失去取向性的主要原因。

Abstract

Effects of pulse electric current on directional solidification structure of Al-4.5Cu alloy have been observed. The results revealed that with increasing in peak value of pulse current and frequency

columnar crystal in the Al-Cu alloy is breakdown to convert strip into discontinuous net to disappear its directional orientation. In addition

the space between columnar crystal is decreased with the increase of the peak value and frequency. The strong turbulence resulted from generated pulsed magnetic force and Joule heat effect during the introduction of pulse electric current are responsible for the disappearance of the directional orientation.