Study on Casting Technology of The Aluminum Blade Wheel by Electromagnetic Pump

DAI Lei; LIU Yun; HOUJi-bo

Views : 0 下载量: 149 CSCD: 2

Export
Share
Collection
Album

Study on Casting Technology of The Aluminum Blade Wheel by Electromagnetic Pump
Issue S1, Pages: 195-197(2008)
Published： 2008 ，
DOI：

扫描看全文

[1]戴雷,刘云,侯击波.铝合金叶轮电磁泵铸造技术研究[J].特种铸造及有色合金,2008(S1):195-197.

DAI Lei, LIU Yun, HOUJi-bo. Study on Casting Technology of The Aluminum Blade Wheel by Electromagnetic Pump. [J]. Special Casting & Nonferrous Alloys (S1):195-197(2008)
[1]戴雷,刘云,侯击波.铝合金叶轮电磁泵铸造技术研究[J].特种铸造及有色合金,2008(S1):195-197. DOI：

DAI Lei, LIU Yun, HOUJi-bo. Study on Casting Technology of The Aluminum Blade Wheel by Electromagnetic Pump. [J]. Special Casting & Nonferrous Alloys (S1):195-197(2008) DOI：

摘要

根据电磁泵原理开发了由电磁泵和保温炉组成的铝合金低压铸造装置

通过试验数据处理并结合数学分析方法

建立了电磁泵工作流量与静压头ΔP等之间的关系式[1]

制定了铝合金叶轮铸件的电磁泵铸造工艺

并进行了实际浇注生产。应用结果表明

采用该技术生产的铝合金叶轮铸件不仅综合性能良好

且成品率明显提高。

Abstract

Based on principle of electromagnetic pump

the aluminum low pressure casting device that consist of electromagnetic pump and holding furnace is developed. Through experimenting and experimental data treatment

the relation between the work flow rate （Q）、the static pressure （ΔP ） and the low pressure casting process of the turbo-charge blade wheel have been established. The result of casting is that produced the qualified blade wheel not only the functions are good

but also the product qualified rate is high.