Steady Apparent Viscosity of Hypereutectic Al-Si Semi-solid Alloy Slurry

Liu Wenyi; Lu Dehong; Jiang Yehua; Zhou Rong

Views : 0 下载量: 313 CSCD: 2

Export
Share
Collection
Album

Steady Apparent Viscosity of Hypereutectic Al-Si Semi-solid Alloy Slurry
Issue 2, Pages: 113-114(2007)
Published： 2007 ，
DOI：

扫描看全文

[1]刘文义,卢德宏,蒋业华,周荣.过共晶铝硅合金半固态浆料表观粘度研究[J].特种铸造及有色合金,2007(02):113-114+79.

Liu Wenyi, Lu Dehong, Jiang Yehua, et al. Steady Apparent Viscosity of Hypereutectic Al-Si Semi-solid Alloy Slurry. [J]. Special Casting & Nonferrous Alloys (2):113-114(2007)
[1]刘文义,卢德宏,蒋业华,周荣.过共晶铝硅合金半固态浆料表观粘度研究[J].特种铸造及有色合金,2007(02):113-114+79. DOI：

Liu Wenyi, Lu Dehong, Jiang Yehua, et al. Steady Apparent Viscosity of Hypereutectic Al-Si Semi-solid Alloy Slurry. [J]. Special Casting & Nonferrous Alloys (2):113-114(2007) DOI：

摘要

通过自制的双筒旋转粘度计对过共晶ZL117合金的表观粘度进行了研究。结果表明

随着保温温度的降低

即固相率的升高

ZL117合金浆料的表观粘度随之增加;随着搅拌电流的增加

其表观粘度先降低

在搅拌电流为14A左右时达到最低

然后增大;随着冷却速度的增大

其表观粘度增大。

Abstract

We have developed a contour rotary viscometer to investigate steady apparent viscosity of hypereutectic ZL117 alloy. The results indicate that with the decrease of holding temperature

that is the increase of solid fraction

the steady apparent viscosity of the alloy slurry is increased. With the increase of stirring rate

the steady apparent viscosity is firstly decreased to the minimum value at about 14A

then increased. In addition

the steady apparent viscosity of the alloy slurry can be improved with raising the cooling rate.