The Effect of Nano-filler on Strength of the Epoxy Adhesive

Xu Baocai; Yin Yujun; Yang Runze; Zhao Zhongmin

Views : 0 下载量: 429 CSCD: 2

Export
Share
Collection
Album

The Effect of Nano-filler on Strength of the Epoxy Adhesive
Issue 12, Pages: 770-772(2006)
Published： 2006 ，
DOI：

扫描看全文

[1]许宝才,尹玉军,杨润泽,赵忠民.纳米填料对环氧树脂胶粘剂强度的影响[J].特种铸造及有色合金,2006(12):770-772+748.

Xu Baocai, Yin Yujun, Yang Runze, et al. The Effect of Nano-filler on Strength of the Epoxy Adhesive. [J]. Special Casting & Nonferrous Alloys (12):770-772(2006)
[1]许宝才,尹玉军,杨润泽,赵忠民.纳米填料对环氧树脂胶粘剂强度的影响[J].特种铸造及有色合金,2006(12):770-772+748. DOI：

Xu Baocai, Yin Yujun, Yang Runze, et al. The Effect of Nano-filler on Strength of the Epoxy Adhesive. [J]. Special Casting & Nonferrous Alloys (12):770-772(2006) DOI：

摘要

通过在环氧胶粘剂中加入纳米填料

研究了纳米填料对环氧胶粘剂强度的影响规律。试验结果表明

在胶粘剂中加入纳米SiO2和一维纳米SiC晶须

获得的环氧树脂（E44、E51）胶粘剂的抗拉强度可以达到69·09MPa

剪切强度达到35·86MPa

改性环氧树脂中填料的最佳加入量为7%的纳米SiO2和10%的一维纳米SiC晶须纤维。

Abstract

Effects of nano-filler on strength of the epoxy adhesive have been examined by adding the nano-filler into the epoxy adhesive. The results show that the tensile strength and shearing strength of the epoxy ad-hesive（E44

E51） are 69.09 MPa and 35.86 MPa. respectively

with the addition of nano-SiO2 particles and one-dimensional nano-SiC whisker. The desirable mechanical properties of the epoxy adhesive can be realized with the addition of 7% nano-SiO2 particles and 10% one-dimensional nano-SiC whisker.