Design of Horizontal Continuous Casting Set-up and Experiment under the Condition of Ultrasonic Power

Gao Xuepeng; Li Xintao; Xi Xiwang; Li Tingju; Wu Yanping; Li Ximeng

Views : 0 下载量: 151 CSCD: 2

Export
Share
Collection
Album

Design of Horizontal Continuous Casting Set-up and Experiment under the Condition of Ultrasonic Power
Issue 10, Pages: 639-641(2006)
Published： 2006 ，
DOI：

扫描看全文

[1]高学鹏,李新涛,郄喜望,李廷举,吴亚萍,李喜孟.功率超声作用下水平连铸装置的设计及试验研究[J].特种铸造及有色合金,2006(10):639-641+605.

Gao Xuepeng, Li Xintao, Xi Xiwang, et al. Design of Horizontal Continuous Casting Set-up and Experiment under the Condition of Ultrasonic Power. [J]. Special Casting & Nonferrous Alloys (10):639-641(2006)
[1]高学鹏,李新涛,郄喜望,李廷举,吴亚萍,李喜孟.功率超声作用下水平连铸装置的设计及试验研究[J].特种铸造及有色合金,2006(10):639-641+605. DOI：

Gao Xuepeng, Li Xintao, Xi Xiwang, et al. Design of Horizontal Continuous Casting Set-up and Experiment under the Condition of Ultrasonic Power. [J]. Special Casting & Nonferrous Alloys (10):639-641(2006) DOI：

摘要

为了提高水平连铸坯的使用性能

设计了一套带有功率超声系统的线坯水平连续铸造装置

并选择键合线用Al-1Si合金作为试验材料在此装置上进行了模拟试验。采用光学显微镜分析了所得到的铸坯凝固组织

观察了铸坯的表面质量

并且对铸坯进行了力学性能测量。结果表明

功率超声作用下

铸坯的凝固组织得到细化

表面质量得到改善

当经功率为1000W的超声波处理后

合金抗拉强度和伸长率分别比未超声处理的合金提高了20.5%和37.5%。

Abstract

A linear-billet horizontal continuous casting set-up with ultrasonic power system has been designed to improve the utility of the horizontal continuous casting linear-billet

and analogue experiment has been conducted on the set-up using Al-Si alloy for bonding-line.Microstructure and surface quality of the linear-billet were observed by OM

and the mechanical properties have been examined.The results show that the microstructure of billet is refined

and the surface quality as well as mechanical properties is improved under the condition of ultrasonic power.