Influence of Annealing on Tensile Property and Microstructure of AZ31 Magnesium Alloy

Peng Caihong; Peng Weiping; Li Peijie

切换中文

Views : 70 Downloads: 995 CSCD: 8

Export
Share with wechat friends or circle of friends

Share
Collection
Album

Influence of Annealing on Tensile Property and Microstructure of AZ31 Magnesium Alloy
- role： First author 第一作者
- Affiliation：
  Tsinghua University,Beijing,China
Peng Caihong
1 ,
- Affiliation：
  Tsinghua University,Beijing,China
Peng Weiping
1 ,
- Affiliation：
  Tsinghua University,Beijing,China
Li Peijie
1
Issue 10, Pages: 661-663(2006)
Published： 2006 ，
DOI：

Scan for full text

Quote
[1]彭彩虹,彭伟平,李培杰.退火工艺对AZ31镁合金组织与性能的影响[J].特种铸造及有色合金,2006(10):661-663+607.

Peng Caihong, Peng Weiping, Li Peijie. Influence of Annealing on Tensile Property and Microstructure of AZ31 Magnesium Alloy. [J]. Special Casting & Nonferrous Alloys (10):661-663(2006)
[1]彭彩虹,彭伟平,李培杰.退火工艺对AZ31镁合金组织与性能的影响[J].特种铸造及有色合金,2006(10):661-663+607. DOI：

Peng Caihong, Peng Weiping, Li Peijie. Influence of Annealing on Tensile Property and Microstructure of AZ31 Magnesium Alloy. [J]. Special Casting & Nonferrous Alloys (10):661-663(2006) DOI：

Abstract

Influence of annealing on tensile strength and microstructure of AZ91 magnesium alloy was investigated.Experimental results show that the occurrence of static recrystallization in magnesium alloy sheet during annealing can be observed,which begins at annealing of 200 ℃,while its recrystallization temperature of the alloys is in range of 200 ℃ to 250 ℃.The influencing mechanism of annealing temperature and annealing time on the microstructure,grain size,hardness and mechanical properties of the alloy sheet was approached.

transl

Keywords

AZ31 Magnesium Alloy; Annealing Treatment; Static Recrystallization; Microstructure; Mechanical Properties

transl

摘要

研究了热处理工艺对AZ31镁合金轧制板材的显微组织和力学性能的影响。试验表明

AZ31镁合金轧制板材在退火过程中发生了静态再结晶现象

200℃时可以观察到再结晶现象

再结晶温度为200～250℃。分析了退火温度和退火时间对合金显微组织、晶粒尺寸、硬度以及力学性能的影响规律。

Abstract

which begins at annealing of 200 ℃

while its recrystallization temperature of the alloys is in range of 200 ℃ to 250 ℃.The influencing mechanism of annealing temperature and annealing time on the microstructure

grain size

hardness and mechanical properties of the alloy sheet was approached.

关键词

AZ31镁合金退火处理静态再结晶显微组织力学性能

Keywords

AZ31 Magnesium AlloyAnnealing TreatmentStatic RecrystallizationMicrostructureMechanical Properties

references

Alert me when the article has been cited

Submit

Effects of Microalloying on Microstructure and Mechanical Properties of Magnesium Alloy

Effects of Ultrasonic Treatment on Microstructure and Properties of AZ31 Magnesium Alloy

Effects of Semi-Continuous Casting Parameters on Microstructures and Mechanical Properties of AZ31 Alloy Ingot

Effect of Rolling Temperature on Microstructure and Mechanical Properties of AZ31 Alloys Sheets Fabricated by Severe Strain Rolling

Effects of Annealing Process on Microstructure and Properties of Rolled AZ31 Magnesium Alloy Sheet at Different Reduction

Related Author

Ma Yutao 大连理工大学材料科学与工程学院,三束材料改性国家重点实验室

Zhang Xingguo 大连理工大学材料科学与工程学院,三束材料改性国家重点实验室

Gong Ningning 大连理工大学材料科学与工程学院,三束材料改性国家重点实验室

Qiu Yue 大连理工大学材料科学与工程学院,三束材料改性国家重点实验室

Jin Junze 大连理工大学材料科学与工程学院,三束材料改性国家重点实验室

Zhao Yuxin 北京工业大学材料科学与工程学院

Wang Zhaohui 北京工业大学材料科学与工程学院

Li Shubo 北京工业大学材料科学与工程学院

Related Institution

School of Materials Science and Engineering, Dalian University of Technology

School of Materials Science and Engineering,Beijing University of Technology

Guangzhou Research Institute of Non-ferrous Metals

Jiangsu Zhongyi New Materials for Automobile Technology Co.,Ltd

江苏中翼汽车新材料科技有限公司

⁰