Deformation Behavior of Semi-solid Magnesium Alloy

Yan Fengyun1; Zhang Yuhai2; Qiang Xudong2

Views : 0 下载量: 177 CSCD: 1

Export
Share
Collection
Album

Deformation Behavior of Semi-solid Magnesium Alloy
Issue 12, Pages: 927-930(2007)
Published： 2007 ，
DOI：

扫描看全文

[1]阎峰云,张玉海,强旭东.镁合金半固态变形特性的研究[J].特种铸造及有色合金,2007(12):927-930+898.

Yan Fengyun1, Zhang Yuhai2, Qiang Xudong2. Deformation Behavior of Semi-solid Magnesium Alloy. [J]. Special Casting & Nonferrous Alloys (12):927-930(2007)
[1]阎峰云,张玉海,强旭东.镁合金半固态变形特性的研究[J].特种铸造及有色合金,2007(12):927-930+898. DOI：

Yan Fengyun1, Zhang Yuhai2, Qiang Xudong2. Deformation Behavior of Semi-solid Magnesium Alloy. [J]. Special Casting & Nonferrous Alloys (12):927-930(2007) DOI：

摘要

影响镁合金半固态流变特性的参数为坯料加热温度、应变速率和保温时间。表观粘度随着剪切速率的增加而降低

当剪切速率大于5×10-3s-1时

表观粘度随剪切速率增加变化缓慢

表观粘度随着加热温度的增高逐渐降低

MB15合金晶粒形状和球化速度导致其表观粘度随固相率的变化曲线不同于AZ91D合金

其变化较为缓慢迟钝;表观粘度随保温时间的增加而减少

趋势近似直线。

Abstract

Parameters influencing rheology behavior of semi-solid magnesium include temperature

strain rate and holding time.Apparent viscosity of the semi-solid magnesium alloy is declined with the increase of shearing rate and heating temperature

however

with the shearing rate more than 5×10-3 s-1

its increase becomes slow gradually.The curves of apparent viscosity to solid fraction of MB15 alloy are different from that of AZ91D due to its grain shape and spheroidization rate

exhibiting slow change.In addition

the apparent viscosity is decreased to keep constant state with increasing in holding time.