Microstructure and Properties of Al-Fe Based Alloy Prepared by Semi-Solid Forming Technology

Liu Bo Wang Shu Sheng Gao He Hang Hong Jun Luan Yang Yuan Xiao Guang

Views : 0 下载量: 139 CSCD: 5

Export
Share
Collection
Album

Microstructure and Properties of Al-Fe Based Alloy Prepared by Semi-Solid Forming Technology
Issue S1, Pages: 382-385(2008)
Published： 2008 ，
DOI：

扫描看全文

[1]刘波,王书生,高鹤,黄宏军,栾阳,袁晓光.半固态成形Al-Fe基合金组织与性能[J].特种铸造及有色合金,2008(S1):382-385.

Liu Bo Wang Shu Sheng Gao He Hang Hong Jun Luan Yang Yuan Xiao Guang. Microstructure and Properties of Al-Fe Based Alloy Prepared by Semi-Solid Forming Technology. [J]. Special Casting & Nonferrous Alloys (S1):382-385(2008)
[1]刘波,王书生,高鹤,黄宏军,栾阳,袁晓光.半固态成形Al-Fe基合金组织与性能[J].特种铸造及有色合金,2008(S1):382-385. DOI：

Liu Bo Wang Shu Sheng Gao He Hang Hong Jun Luan Yang Yuan Xiao Guang. Microstructure and Properties of Al-Fe Based Alloy Prepared by Semi-Solid Forming Technology. [J]. Special Casting & Nonferrous Alloys (S1):382-385(2008) DOI：

摘要

设计了一种Al-Fe合金的化学成分

采用半固态技术进行了成形

分析了合金铸态、电磁搅拌态、挤压态的组织

检测了合金铸态、半固态成形态的力学性能。试验结果表明:合金元素的加入和凝固过程中外加电磁搅拌以后

合金组织明显细化;经过半固态成形后

合金组织进一步细化

第二相长度和厚度减小

同时尖角发生钝化

且分布较均匀

力学性能比铸态提高了79.7%。

Abstract

In this paper

an Al-Fe alloy chemical composition has been designed; semi-solid forming technology has been used to prepare the alloy. The microstructure of the alloy as cast

electromagnetic stirred and semi-solid formation state has been analyzed and the mechanical properties of the alloy have been tested. The results show that microstructure of the alloy becomes obviously thinner after the alloying and electromagnetic stirring

semi-solid formation processing makes the microstructure further refined. The length and thickness of the second phase decrease; at the same time

the acute angles disappear

and their distributions also become more homogeneous. The tensile strength of the alloy increases about 79.7% compared with the alloy at cast condition.