Numerical Simulation of Filling of Magnesium Alloy Steering Wheel in Die Casting

Chang Huanhuan; Long Siyuan; Cao Hanxue; Du Yong

Views : 0 下载量: 190 CSCD: 2

Export
Share
Collection
Album

Numerical Simulation of Filling of Magnesium Alloy Steering Wheel in Die Casting
Issue 5, Pages: 357-358(2008)
Published： 2008 ，
DOI：

扫描看全文

[1]常欢欢,龙思远,曹韩学,杜勇.数值模拟在镁合金方向盘压铸工艺上的应用[J].特种铸造及有色合金,2008(05):357-358+325.

Chang Huanhuan, Long Siyuan, Cao Hanxue, et al. Numerical Simulation of Filling of Magnesium Alloy Steering Wheel in Die Casting. [J]. Special Casting & Nonferrous Alloys (5):357-358(2008)
[1]常欢欢,龙思远,曹韩学,杜勇.数值模拟在镁合金方向盘压铸工艺上的应用[J].特种铸造及有色合金,2008(05):357-358+325. DOI：

Chang Huanhuan, Long Siyuan, Cao Hanxue, et al. Numerical Simulation of Filling of Magnesium Alloy Steering Wheel in Die Casting. [J]. Special Casting & Nonferrous Alloys (5):357-358(2008) DOI：

摘要

利用CAE铸造模拟软件指导镁合金方向盘的模具设计

能够预测零件在铸造过程中可能产生缺陷的位置。就产生缺陷的原因加以分析

对压铸模具进行了修改和优化。模拟结果表明

改进工艺对缺陷有明显的改善

有利于提高铸件的质量。

Abstract

The mould for magnesium alloy steering wheel can be designed by the CAE software which can predict potential defect location in die casting. Based on analysis of simulated results

the die casting die was modified and optimized. The results show that the defects in the die casting magnesium steering wheel can be greatly eliminated by using modified process

improving the quality of the castings.