Production of Large Stainless Steel Valve in Investment Casting

Yang Haiqing

Views : 0 下载量: 194 CSCD: 1

Export
Share
Collection
Album

Production of Large Stainless Steel Valve in Investment Casting
Issue 1, Pages: 45-46(2008)
Published： 2008 ，
DOI：

扫描看全文

[1]阳海清.大型不锈钢阀门精铸工艺的探讨[J].特种铸造及有色合金,2008(01):45-46+2.

Yang Haiqing. Production of Large Stainless Steel Valve in Investment Casting. [J]. Special Casting & Nonferrous Alloys (1):45-46(2008)
[1]阳海清.大型不锈钢阀门精铸工艺的探讨[J].特种铸造及有色合金,2008(01):45-46+2. DOI：

Yang Haiqing. Production of Large Stainless Steel Valve in Investment Casting. [J]. Special Casting & Nonferrous Alloys (1):45-46(2008) DOI：

摘要

特大型不锈钢阀体熔模精密铸造与砂型铸造比较

最大的问题是铸件的凝固控制。通过对型壳的组成和厚度的处理

冒口补缩系统的改进和浇注工艺的控制等措施

降低钢水的浇注温度

增加补浇次数

加盖覆盖剂等

避免了缩孔和缩松现象

组装后试验完全合格。

Abstract

Compared with large stainless steel valve body in sand casting

it was difficult to control solidification process in investment casting

which results in some defects in the valve body.Through adjusting the composition and thickness of mold shell and improving the feeding system as well as controlling pouring process

the shrinkage porosity（hole）can be effectively eliminated in the valve body in investment casting

obtaining qualified valve body.