K403 Gas Turbine Nozzle in Investment Casting

Zhou Zhihua1; Yang Manli1; Li Wei1; Chen Xingfu1; Pei Zhongye2; Li Juntao1; Zhao Minghan1

Views : 0 下载量: 226 CSCD: 2

Export
Share
Collection
Album

K403 Gas Turbine Nozzle in Investment Casting
Issue 5, Pages: 378-380(2008)
Published： 2008 ，
DOI：

扫描看全文

[1]周志华,杨曼利,李维,陈兴福,裴忠冶,李俊涛,赵明汉.K403合金燃气轮机涡轮导向器精铸工艺研究[J].特种铸造及有色合金,2008(05):378-380+326.

Zhou Zhihua1, Yang Manli1, Li Wei1, et al. K403 Gas Turbine Nozzle in Investment Casting. [J]. Special Casting & Nonferrous Alloys (5):378-380(2008)
[1]周志华,杨曼利,李维,陈兴福,裴忠冶,李俊涛,赵明汉.K403合金燃气轮机涡轮导向器精铸工艺研究[J].特种铸造及有色合金,2008(05):378-380+326. DOI：

Zhou Zhihua1, Yang Manli1, Li Wei1, et al. K403 Gas Turbine Nozzle in Investment Casting. [J]. Special Casting & Nonferrous Alloys (5):378-380(2008) DOI：

摘要

介绍了采用无余量整体精密铸造技术研制K403合金燃气轮机涡轮导向器的过程

并对该铸件的铸造工艺进行了系统的研究。结果表明

通过快速成型技术来制造蜡模

大大缩短了精铸件的研制周期

降低了生产成本;采用联合注入式浇注系统

浇注时使用较高的浇注温度和型壳温度

浇注出的铸件冶金质量优良

满足了设计和使用的要求。

Abstract

K403 alloy gas turbine nozzle was produced by investment casting

and the casting process has been investigated systematically. The results show that the developing period of the K403 alloy gas turbine nozzle can be greatly shortened with the reduction of production cost by rapid prototyping technology to produce investment pattern. The castings have desirable metallurgical quality and entirely meet the requirements of the design and use by adopting the united-inpouring gating system with higher pouring and shell mold temperature.