Effects of Al on Wear Resistance of ZG40Cr25Ni20 Steel

Views : 0 下载量: 108 CSCD: 1

扫描看全文

[1]张炎,孙玉福,关绍康,闫兴义,蒋爱蓉.Al对ZG40Cr25Ni20耐磨性的影响[J].特种铸造及有色合金,2008(09):677-679+652.

Zhang Yan, Sun Yufu, Guan Shaokang, et al. Effects of Al on Wear Resistance of ZG40Cr25Ni20 Steel. [J]. Special Casting & Nonferrous Alloys (9):677-679(2008)
[1]张炎,孙玉福,关绍康,闫兴义,蒋爱蓉.Al对ZG40Cr25Ni20耐磨性的影响[J].特种铸造及有色合金,2008(09):677-679+652. DOI：

Zhang Yan, Sun Yufu, Guan Shaokang, et al. Effects of Al on Wear Resistance of ZG40Cr25Ni20 Steel. [J]. Special Casting & Nonferrous Alloys (9):677-679(2008) DOI：

对Al含量为0、1.68%、4.72%和7.10%的ZG40Cr25Ni20进行了对比磨损试验。结果表明

Al的加入可以不同程度的提高材料的耐磨性能

Al含量为7.10%时耐磨性最好

其在相同条件下的耐磨性为不含Al时的2.62倍

其次为Al含量为4.72%

其耐磨性比Al含量为1.68%时提高66.40%

试验合金的磨损机理为微观切削。

Effects of different Al contents

including 0

1.68%

4.72% and 7.10%

on wear resistance of ZG40Cr25Ni20 steel were examined by metalloscope

X-ray diffraction （XRD）

scanning electron microscope （SEM） and wear resistant testing. The results show that Al content can improve the wear resistance of the steel

and the steel exhibits desirable wear resistance with 7.10% Al content

which is higher 2.62 times than that of the steel without Al at the same condition. Meanwhile

compared with that of one with 1.68% Al

the wear resistance of steel with 4.72% Al is increased by 66.40%. Wear mechanism of the experimental alloy is characterized by micro-cutting.

Al耐磨性磨损量磨损机理

AluminumWear ResistanceWeight LossWearing Mechanism

Alert me when the article has been cited

提交