Quantitative analysis of the effects of cooling rate on the microstructure of A356 aluminum alloy casting

Huang Longhui; Shao Guangjie; Yang Yitao

Views : 0 下载量: 504 CSCD: 14

Export
Share
Collection
Album

Quantitative analysis of the effects of cooling rate on the microstructure of A356 aluminum alloy casting
Issue S1, Pages: 165-167(2008)
Published： 2008 ，
DOI：

扫描看全文

[1]黄龙辉,邵光杰,杨弋涛.冷却速度对A356铝合金铸件组织影响的定量分析[J].特种铸造及有色合金,2008(S1):165-167.

Huang Longhui, Shao Guangjie, Yang Yitao. Quantitative analysis of the effects of cooling rate on the microstructure of A356 aluminum alloy casting. [J]. Special Casting & Nonferrous Alloys (S1):165-167(2008)
[1]黄龙辉,邵光杰,杨弋涛.冷却速度对A356铝合金铸件组织影响的定量分析[J].特种铸造及有色合金,2008(S1):165-167. DOI：

Huang Longhui, Shao Guangjie, Yang Yitao. Quantitative analysis of the effects of cooling rate on the microstructure of A356 aluminum alloy casting. [J]. Special Casting & Nonferrous Alloys (S1):165-167(2008) DOI：

摘要

围绕A356铝合金金属型重力铸造成形试样的微观组织形貌与铸造条件之间的关系

通过组织分析和冷却速度的计算机模拟

研究了共晶含量与冷却速度之间的定量关系。结果表明

随着冷却速度的提高

凝固组织中的共晶含量增多

而且初生相组织的形态也由粗大的树枝晶逐步向蔷薇状枝晶演变。通过计算机模拟可较为准确地了解铸件各部位的冷却情况

并为预测铸件不同位置的组织和性能提供参考

为在工业生产中研发结构复杂、形状各异的零件奠定必要的基础。

Abstract

This article investigated the relation between the structure morphology and casting conditions of A356 aluminum alloy casting. With the help of structure analysis and computer simulation of cooling rate

the quantitative relation between eutectic content and cooling condition was studied. The results showed that the eutectic content in the solidification structure was increased while the cooling rate of casting increased

the evolution of primary phase was from coarse dendritic to rosette dendritic

We can precisely predict the cooling condition in different positions of the casting by computer simulation

and provide a kind of reference for the prediction of the microstructure and property in the different locations of casting. These lay the necessary foundation for the development of casting parts with complex shape and varied demands.