Optimization of Processing Parameters for Die Casting Cylinder Cover Based on Orthogonal Testing

Lin Ying; Hu Qingming; Liu Bin; Yu Manye; Chang Yonggui

Views : 0 下载量: 138 CSCD: 2

Export
Share
Collection
Album

Optimization of Processing Parameters for Die Casting Cylinder Cover Based on Orthogonal Testing
Vol. 28, Issue 12, Pages: 935-938(2008)
Published： 2008 ，
DOI：

扫描看全文

[1]林颖,胡清明,刘斌,余熳烨,常永贵.基于正交试验的缸盖罩压铸工艺参数优化[J].特种铸造及有色合金,2008,28(12):935-938+899.

Lin Ying, Hu Qingming, Liu Bin, et al. Optimization of Processing Parameters for Die Casting Cylinder Cover Based on Orthogonal Testing. [J]. Special Casting & Nonferrous Alloys 28(12):935-938(2008)
[1]林颖,胡清明,刘斌,余熳烨,常永贵.基于正交试验的缸盖罩压铸工艺参数优化[J].特种铸造及有色合金,2008,28(12):935-938+899. DOI：

Lin Ying, Hu Qingming, Liu Bin, et al. Optimization of Processing Parameters for Die Casting Cylinder Cover Based on Orthogonal Testing. [J]. Special Casting & Nonferrous Alloys 28(12):935-938(2008) DOI：

摘要

基于正交试验方法

并结合铸造专用数值模拟软件JSCAST对镁合金缸盖罩压铸工艺参数进行优化模拟研究

确定了指导企业压铸生产的优化工艺参数:压射速度为7m/s

浇注温度为690℃

模具温度为210℃。镁合金缸盖罩压铸工艺试验验证了所确定优化工艺参数的合理性

同时也证明了压铸过程数值模拟的可靠性。

Abstract

Optimized processing parameters for die casting cylinder cover were determined by orthogonal testing combining with numerical simulation of JSCAST software.The results indicate that the desirable cylinder cover can be produced with pouring at 690℃ and injecting velocity at 7 m/s as well as preheating die at 210℃

which was validated by practical production

showing availability of numerical simulation in die casting.