Creep Mechanism of Mg-Nd-Zn-Zr（ZM6） Alloy at Ambient Temperature

Zhong Yingying1; Zhang Xinming2; Deng Yunlai2; Xu Shufang1; Yu Yanbing1; Shen Feng1

Views : 0 下载量: 368 CSCD: 6

Export
Share
Collection
Album

Creep Mechanism of Mg-Nd-Zn-Zr（ZM6） Alloy at Ambient Temperature
Vol. 29, Issue 4, Pages: 378-381(2009)
Published： 2009 ，
DOI：

扫描看全文

[1]仲莹莹,张新明,邓运来,许树芳,余艳兵,沈枫.ZM6合金室温蠕变机理研究[J].特种铸造及有色合金,2009,29(04):378-381+293.

Zhong Yingying1, Zhang Xinming2, Deng Yunlai2, et al. Creep Mechanism of Mg-Nd-Zn-Zr（ZM6） Alloy at Ambient Temperature. [J]. Special Casting & Nonferrous Alloys 29(4):378-381(2009)
[1]仲莹莹,张新明,邓运来,许树芳,余艳兵,沈枫.ZM6合金室温蠕变机理研究[J].特种铸造及有色合金,2009,29(04):378-381+293. DOI：

Zhong Yingying1, Zhang Xinming2, Deng Yunlai2, et al. Creep Mechanism of Mg-Nd-Zn-Zr（ZM6） Alloy at Ambient Temperature. [J]. Special Casting & Nonferrous Alloys 29(4):378-381(2009) DOI：

摘要

采用单轴拉伸法对Mg-Nd-Zn-Zr（ZM6）合金在308K的蠕变行为进行了测试。在低于屈服强度的应力下

随应力的增加

蠕变量增加。通过蠕变量、应力与时间的关系

获得了蠕变速率及蠕变应力指数。通过比较各种蠕变机制的蠕变速率

确定合金室温蠕变机制为位错滑移。TEM分析表明

镁合金蠕变过程中发生了基面滑移

也存在极少量的孪生。

Abstract

Creep behavior of Mg-Nd-Zn-Zr（ZM6） alloy at 308 K was tested by a uniaxial tension method. The results show that with stress less than yield strength

creep rate is increased with increasing in stress. Creep rate and creep stress exponent were determined by analyzing relation of creep stress with time. Creep mechanism of the ZM6 alloy at ambient temperature is characterized by dislocation slipping. Datum plane slipping accompanying with few twins can be observed by TEM （transmission electron microscope） during creeping process.