Investment Casting CuNiSiTi Alloy and Its Heat Treatment

Zhu Zhiyuan1; Wang Rong1; Zhang Lei1

Views : 0 下载量: 71 CSCD: 0

Export
Share
Collection
Album

Investment Casting CuNiSiTi Alloy and Its Heat Treatment
Vol. 29, Issue 7, Pages: 628-630(2009)
Published： 2009 ，
DOI：

扫描看全文

[1]朱治愿,王荣,张雷.CuNiSiTi合金的精密铸造及热处理[J].特种铸造及有色合金,2009,29(07):628-630+584.

Zhu Zhiyuan1, Wang Rong1, Zhang Lei1. Investment Casting CuNiSiTi Alloy and Its Heat Treatment. [J]. Special Casting & Nonferrous Alloys 29(7):628-630(2009)
[1]朱治愿,王荣,张雷.CuNiSiTi合金的精密铸造及热处理[J].特种铸造及有色合金,2009,29(07):628-630+584. DOI：

Zhu Zhiyuan1, Wang Rong1, Zhang Lei1. Investment Casting CuNiSiTi Alloy and Its Heat Treatment. [J]. Special Casting & Nonferrous Alloys 29(7):628-630(2009) DOI：

摘要

用熔模精密铸造法制备了CuNiSiTi焊钳活动轴;并基于此对合金进行了热处理强化工艺研究。用硬度计、涡流电导率测试仪和万能试验机测试合金性能

用光学金相显微镜（OM）观察合金的组织

探讨了铸态下合金的强化机理。结果表明

合理设计浇注系统可获得铸造质量合格的焊钳活动轴。铸造CuNiSiTi合金经920℃×1.5h固溶处理（水冷）+480℃×3h时效处理（炉冷）

合金的硬度HB达210、电导率达13.9MS/m、抗拉强度达590MPa、屈服强度达485MPa、伸长率达11%。

Abstract

CuNiSiTi electrode holder mobile bar was produced by investment casting

and effects of heat treatment on the mobile bar were investigated. The mechanical properties and microstructure of the alloy were examined and observed by the sclerometer

eddy electrical conductivity tester and universal material testing machine as well as OM （optical microscope）

meanwhile

strengthening mechanism of the alloy was described. The production verifies that electrode holder mobile bar with qualified quality can be successfully produced by designing proper gating system. The hardness

electrical conductivity

tensile strength

yield strength and elongation of the alloy reach 210HB

13.92MS/m

590MPa

485MPa and 11%

respectively

after solution at 920℃ for 1.5 hours （ water cooling） and at 480℃ for 3 hours （furnace cooling）

meeting the property requirements of electrode holder mobile bar.