CAD/CAE/CAM Design of Casting Mould Based on Pro/E

Views : 0 下载量: 251 CSCD: 1

Export
Share
Collection
Album

CAD/CAE/CAM Design of Casting Mould Based on Pro/E
Vol. 29, Issue 11, Pages: 1010-1011(2009)
Published： 2009 ，
DOI：

扫描看全文

[1]郭凌,孙敏,孟志荣,刘锦益.基于Pro/E的铸造模具CAD/CAE/CAM设计[J].特种铸造及有色合金,2009,29(11):1010-1011+975.

Guo Ling1, Sun Min1, Meng Zhirong2, et al. CAD/CAE/CAM Design of Casting Mould Based on Pro/E. [J]. Special Casting & Nonferrous Alloys 29(11):1010-1011(2009)
[1]郭凌,孙敏,孟志荣,刘锦益.基于Pro/E的铸造模具CAD/CAE/CAM设计[J].特种铸造及有色合金,2009,29(11):1010-1011+975. DOI：

Guo Ling1, Sun Min1, Meng Zhirong2, et al. CAD/CAE/CAM Design of Casting Mould Based on Pro/E. [J]. Special Casting & Nonferrous Alloys 29(11):1010-1011(2009) DOI：

摘要

使用Pro/E软件进行三维CAD工艺模型设计

运用Anycasting软件进行工艺模拟分析

预测缺陷

优化工艺设计

再返回Pro/E完成模具设计

然后直接转入数控加工CAM

从而有效缩短新产品的开发周期

提高设计的可靠性。

Abstract

3D CAD mould was designed based on Pro/E

and processing simulation analysis

defects prediction and processing design optimization were performed by the Anycasting software.Then mould design was completed by the Pro/E

and CAM was conducted directly

which could greatly shorten the developing period of new product and improve the reliability of design.

关键词

Pro/E铸造模具CAD/CAE/CAM技术

Keywords

Pro/ECasting MouldCAD/CAE/CAM Design

references

Alert me when the article has been cited

提交

相关文章

CAD/CAE在发电机支架压铸件开发中的应用

Design of Die Casting Die for Box Part System Based on Pro/E

Virtual Reality Design of Squeeze Casting Mold Based On Cult 3D

Numerical Simulation and Optimization of Die Casting Process for the Torch Parts

Tilted Pouring of No-bake Resin Sand Mould

相关作者

王泽忠东风汽车有限公司工艺研究所

崔代金东风十堰有色铸件有限公司

杨召岭东风十堰有色铸件有限公司

胡华安东风十堰有色铸件有限公司

李文兵东风十堰有色铸件有限公司

董艺东风十堰有色铸件有限公司

Ji Ning 沈阳理工大学材料科学与工程学院

Huang Yong 沈阳理工大学材料科学与工程学院

相关机构

东风汽车有限公司工艺研究所

东风十堰有色铸件有限公司

School of Materials Science and Engineering,Shenyang University of Science and Technology

Wuhan University of Technology

Dalian Locomotive & Rolling Stock Co., Ltd., CNP Group

⁰