Numerical Simulation of Revolving-riveting Process for Aluminum Alloy

Li Bing1; You Guoqiang1; Long Siyuan1; Zhang Baizai3; Yu Liang3

Views : 0 下载量: 176 CSCD: 2

Export
Share
Collection
Album

Numerical Simulation of Revolving-riveting Process for Aluminum Alloy
Vol. 30, Issue 4, Pages: 314-317(2010)
Published： 2010 ，
DOI：

扫描看全文

[1]李兵,游国强,龙思远,张百在,余亮.铝合金旋铆连接过程数值模拟分析[J].特种铸造及有色合金,2010,30(04):314-317+286.

Li Bing1, You Guoqiang1, Long Siyuan1, et al. Numerical Simulation of Revolving-riveting Process for Aluminum Alloy. [J]. Special Casting & Nonferrous Alloys 30(4):314-317(2010)
[1]李兵,游国强,龙思远,张百在,余亮.铝合金旋铆连接过程数值模拟分析[J].特种铸造及有色合金,2010,30(04):314-317+286. DOI：

Li Bing1, You Guoqiang1, Long Siyuan1, et al. Numerical Simulation of Revolving-riveting Process for Aluminum Alloy. [J]. Special Casting & Nonferrous Alloys 30(4):314-317(2010) DOI：

摘要

以铝合金基体件与钢板的旋铆连接工艺为对象

采用数值模拟手段和点追踪方法对铆钉成形过程进行了研究。主要分析了变形区的各个质点应力应变动态变化规律以及整个成形区的损伤分布情况

为有效地进行工艺研究、工艺设计提供了理论依据。

Abstract

The rivet forming process was investigated by numerical simulation and point-tracking method based on the connecting technology between the aluminum alloy workpiece and the steel plate. Dynamic change of stress-strain at every point in deformation area and damage distribution of the deformation area were analyzed

which provided a theoretical basis for the study and design of the riveting process.