Yang Zhijun, Kou Hongchao, Chang Hui, et al. Effects of VAR (Vacuum Consumable Arc Remelting) Processing Parameters on Solidification Behavior of Ti-10V-2Fe-3Al Alloy Ingot. [J]. Special Casting & Nonferrous Alloys 30(4):295-297(2010)
Yang Zhijun, Kou Hongchao, Chang Hui, et al. Effects of VAR (Vacuum Consumable Arc Remelting) Processing Parameters on Solidification Behavior of Ti-10V-2Fe-3Al Alloy Ingot. [J]. Special Casting & Nonferrous Alloys 30(4):295-297(2010)DOI:
Effects of VAR (Vacuum Consumable Arc Remelting) Processing Parameters on Solidification Behavior of Ti-10V-2Fe-3Al Alloy Ingot
摘要
采用真空自耗电弧熔炼(VAR)工艺制备Ti-10V-2Fe-3Al铸锭
研究了熔炼电流和搅拌磁场等工艺参数对铸锭凝固行为的影响
并对真空自耗电弧熔炼过程中起弧、熔炼、补缩等阶段的凝固组织及熔池形貌进行了分析。结果表明
在未加搅拌磁场时
熔池较窄
铸锭组织粗大
而施加搅拌磁场后
熔池变宽且旋转明显
铸锭宏观组织中的晶粒变小;随熔炼电流增大
熔池加深
凝固组织中的晶粒变得粗大。
Abstract
Ti-10V-2Fe-3Al alloy ingots were prepared by different vacuum consumable arc remelting (VAR) processes. The effects of melting current intensity and stirring magnetic field on solidification behavior of the ingots were investigated
and molten pool profile and solidification structure at different stages
such as arc starting
melting and feeding
were analyzed. The results indicate that without stirring magnetic field
coarse grain can be observed in the ingots with a narrow molten pool
while with stirring magnetic field
grain size becomes fine with wide molten pool and evident rotation. With increasing in current intensity
grain size becomes coarse in the ingot with deepening the molten pool.
关键词
VARTi-10V-2Fe-3Al合金电磁搅拌凝固行为熔池
Keywords
VARTi-10V-2Fe-3Al AlloyElectromagnetic StirringSolidification BehaviorMolten Pool