Microstructure and Strengthening-toughening Mechanism of Mg-RE（Nd, Y）-0.48Zn-0.52Zr Alloys

Dong Lijun1; Xia Changqing1; Wu Anru2; Gao Weiguo2

切换中文

Views : 21 Downloads: 151 CSCD: 2

Export
Share with wechat friends or circle of friends

Share
Collection
Album

Microstructure and Strengthening-toughening Mechanism of Mg-RE（Nd, Y）-0.48Zn-0.52Zr Alloys
- role： First author 第一作者
- Affiliation：
  School of Materials Science and Engineering, Central South University,Changsha,China
  Department of Mechanical Engineering, Hunan Institute of Engineering,Xiangtan,China
Dong Lijun1
1 2 ,
- Affiliation：
  School of Materials Science and Engineering, Central South University,Changsha,China
Xia Changqing1
1 ,
- Affiliation：
  Department of Mechanical Engineering, Hunan Institute of Engineering,Xiangtan,China
  State Key Laboratory of Advanced Metal Materials, University of Science and Technology Beijing,Beijing,China
Wu Anru2
2 3 ,
- Affiliation：
  Department of Mechanical Engineering, Hunan Institute of Engineering,Xiangtan,China
Gao Weiguo2
2
Vol. 29, Issue 10, Pages: 901-904(2009)
Published： 2009 ，
DOI：

Scan for full text

Quote
[1]董丽君,夏长清,吴安如,高为国.Mg-RE(Nd,Y)-0.48Zn-0.52Zr合金显微组织及强韧化机理[J].特种铸造及有色合金,2009,29(10):901-904+876-877.

Dong Lijun1, Xia Changqing1, Wu Anru2, et al. Microstructure and Strengthening-toughening Mechanism of Mg-RE（Nd, Y）-0.48Zn-0.52Zr Alloys. [J]. Special Casting & Nonferrous Alloys 29(10):901-904(2009)
[1]董丽君,夏长清,吴安如,高为国.Mg-RE(Nd,Y)-0.48Zn-0.52Zr合金显微组织及强韧化机理[J].特种铸造及有色合金,2009,29(10):901-904+876-877. DOI：

Dong Lijun1, Xia Changqing1, Wu Anru2, et al. Microstructure and Strengthening-toughening Mechanism of Mg-RE（Nd, Y）-0.48Zn-0.52Zr Alloys. [J]. Special Casting & Nonferrous Alloys 29(10):901-904(2009) DOI：

Abstract

Microstructure and phase constituent of Mg-RE（Nd, Y）-0.48Zn-0.52Zr alloy were analyzed by OM （optical microscope）, SEM （scanning electron microscope） and XRD （X-ray diffraction）. Meanwhile, the mechanical properties at room temperature and at high temperature of two kinds of as-extruded samples were tested, and they were compared with those of extrusion +T5 heat treated ones. The results show that tensile strength of Mg-RE（Nd）-0.48Zn-0.52Zr reaches 79MPa at 300℃ while tensile strength of Mg-RE（Y）-0.48Zn-0.52Zr reaches 202.53MPa at 330℃. The Y element plays the obvious role in improving elevated tensile strength of the alloy.

transl

摘要

采用光学显微镜、扫描电镜及X射线衍射等对Mg-RE（Nd

Y）-0.48Zn-0.52Zr合金组织及相组成进行了分析。对2种合金的挤压态试样进行了室温力学性能及高温力学性能试验

并与T5热处理后进行比较。Mg-Nd-0.48Zn-0.52Zr合金在300℃时的抗拉强度为79.00MPa

Mg-Nd-Y-0.48Zn-0.52Zr合金在330℃时的抗拉强度为202.53MPa

试验结果表明

添加Y对提高合金高温抗拉强度有明显的作用。

Abstract

Microstructure and phase constituent of Mg-RE（Nd

Y）-0.48Zn-0.52Zr alloy were analyzed by OM （optical microscope）

SEM （scanning electron microscope） and XRD （X-ray diffraction）. Meanwhile

the mechanical properties at room temperature and at high temperature of two kinds of as-extruded samples were tested

and they were compared with those of extrusion +T5 heat treated ones. The results show that tensile strength of Mg-RE（Nd）-0.48Zn-0.52Zr reaches 79MPa at 300℃ while tensile strength of Mg-RE（Y）-0.48Zn-0.52Zr reaches 202.53MPa at 330℃. The Y element plays the obvious role in improving elevated tensile strength of the alloy.

关键词

Mg-RE（NdY）-0.48Zn-0.52Zr合金显微组织高温力学性能

Keywords

references

Alert me when the article has been cited

Submit

Ti、Sc、Zr联合添加对7005铝合金组织和性能的影响

Cu、Ni元素对Mg-4Zn合金显微组织及降解性能的影响

TA10钛合金热连轧板材显微组织及其性能

退火工艺对轧制态Mg-Al-Ca-Mn-Zn合金组织和力学性能影响

热处理温度对CoCrFeNiSn高熵合金组织及性能的影响

Related Author

倪培相天润工业技术股份有限公司技术中心

邢毅山东省威海市住房公积金管理中心

孙军天润工业技术股份有限公司技术中心

王磊天润工业技术股份有限公司技术中心

左秀荣郑州大学材料物理教育部重点实验室

王小刚山西银光华盛镁业股份有限公司技术中心

刘涛山西银光华盛镁业股份有限公司技术中心

李伟莉山西银光华盛镁业股份有限公司技术中心

Related Institution

郑州大学材料物理教育部重点实验室

山东省威海市住房公积金管理中心

天润工业技术股份有限公司技术中心

山西银光华盛镁业股份有限公司技术中心

云南钛业股份有限公司

⁰