Preparation of 3003/4004 Cladding Materials by Semi-continuous Casting

Liu Ding

Views : 0 下载量: 152 CSCD: 1

Export
Share
Collection
Album

Preparation of 3003/4004 Cladding Materials by Semi-continuous Casting
Vol. 30, Issue 5, Pages: 446-449(2010)
Published： 2010 ，
DOI：

扫描看全文

[1]刘鼎.半连续铸造制备3003/4004板坯复层材料[J].特种铸造及有色合金,2010,30(05):446-449+388.

Liu Ding. Preparation of 3003/4004 Cladding Materials by Semi-continuous Casting. [J]. Special Casting & Nonferrous Alloys 30(5):446-449(2010)
[1]刘鼎.半连续铸造制备3003/4004板坯复层材料[J].特种铸造及有色合金,2010,30(05):446-449+388. DOI：

Liu Ding. Preparation of 3003/4004 Cladding Materials by Semi-continuous Casting. [J]. Special Casting & Nonferrous Alloys 30(5):446-449(2010) DOI：

摘要

试验采用双流浇注半连续铸造方法

在自行设计的半连续铸造装置上制备了3003/4004铝合金板坯复层材料。分析了所制备合金的成分、显微组织和力学性能。结果表明

采用半连续铸造制备3003/4004板坯可以实现不同合金成分在界面两侧的均匀分布;合金的硬度与成分分布和显微组织之间具有良好的对应关系

界面结合强度较高。

Abstract

3003/4004 aluminum alloy cladding materials were produced by double-stream-pouring semi-continuous casting using a self-developed semi-continuous casting device.The composition

microstructure and mechanical properties of the prepared composites were investigated.The results show that uniform distribution of different alloy composition in interface can be observed in produced 3003/4004 aluminum alloy cladding materials

and there exists observed corresponding relation among the hardness

mechanical properties and composition distribution

microstructure

showing a higher interfacial strength.It is feasible for preparing 3003/4004 aluminum alloy cladding materials by double-streaming-pouring semi-continuous casting.