Hard Spots in High Strength and Wear Resistant Aluminum Brass（KK5）

Views : 0 下载量: 140 CSCD: 4

扫描看全文

[1]朱权利,张先满,陈家坚,陈维平,汪桂龙,李晨,陈志力.高强耐磨铝黄铜(KK5)硬质点的研究[J].特种铸造及有色合金,2010,30(09):876-877+784.

Zhu Quanli1, Zhang Xianman1, Chen Jiajian1, et al. Hard Spots in High Strength and Wear Resistant Aluminum Brass（KK5）. [J]. Special Casting & Nonferrous Alloys 30(9):876-877(2010)
[1]朱权利,张先满,陈家坚,陈维平,汪桂龙,李晨,陈志力.高强耐磨铝黄铜(KK5)硬质点的研究[J].特种铸造及有色合金,2010,30(09):876-877+784. DOI：

Zhu Quanli1, Zhang Xianman1, Chen Jiajian1, et al. Hard Spots in High Strength and Wear Resistant Aluminum Brass（KK5）. [J]. Special Casting & Nonferrous Alloys 30(9):876-877(2010) DOI：

通过光学金相显微镜、扫描电镜及能谱分析、硬度测定

系统地研究了高强度耐磨铝黄铜合金（KK5）铸件中出现的大块状硬质点

分析了该硬质点产生的根源

并提出了相应的预防措施

经过生产实际验证

取得了良好的效果。

Hard spots in high strength and wear resistant aluminum brass components were investigated systematically by optical microscope

scanning electron microscope and EDS

micro-hardness testing. Origination of the hard spots in the aluminum brass parts was described

and countermeasures were presented.

铝黄铜硬质点高强耐磨

Aluminum BrassHard SpotHigh Strength and Wear Resistance

Alert me when the article has been cited

提交