Effects of Trace Antimony on the Section Sensitivity of HCC （Horizontal Continuous Casting） Gray Iron Bars

Meng Lingnan1; Xu Chunjie2; Zhang Zhongming2

Views : 0 下载量: 97 CSCD: 3

Export
Share
Collection
Album

Effects of Trace Antimony on the Section Sensitivity of HCC （Horizontal Continuous Casting） Gray Iron Bars
Vol. 30, Issue 6, Pages: 501-503(2010)
Published： 2010 ，
DOI：

扫描看全文

[1]孟令楠,徐春杰,张忠明.Sb对水平连铸大直径灰铁型材断面敏感性的影响[J].特种铸造及有色合金,2010,30(06):501-503+591-592.

Meng Lingnan1, Xu Chunjie2, Zhang Zhongming2. Effects of Trace Antimony on the Section Sensitivity of HCC （Horizontal Continuous Casting） Gray Iron Bars. [J]. Special Casting & Nonferrous Alloys 30(6):501-503(2010)
[1]孟令楠,徐春杰,张忠明.Sb对水平连铸大直径灰铁型材断面敏感性的影响[J].特种铸造及有色合金,2010,30(06):501-503+591-592. DOI：

Meng Lingnan1, Xu Chunjie2, Zhang Zhongming2. Effects of Trace Antimony on the Section Sensitivity of HCC （Horizontal Continuous Casting） Gray Iron Bars. [J]. Special Casting & Nonferrous Alloys 30(6):501-503(2010) DOI：

摘要

采用合金化方法研究了微量Sb对185mm大截面A型和D型石墨的水平连铸灰铸铁型材基体组织及断面敏感性的影响。结果表明

微量Sb合金化可有效提高大断面D型或A型石墨铸铁型材基体组织中的珠光体含量

有利于提高型材断面硬度绝对值、抗拉强度

降低型材断面的硬度差

改善铸件的断面敏感性。

Abstract

Matrix microstructure and section sensitivity of HCC gray iron bars with diameters of 185 mm containing A type graphite or D type graphite were investigated by adding trace antimony. The results reveal that trace Sb addition can greatly increase the content of pearlite in the microstructure of gray iron matrix containing A type graphite or D type graphite

which is favorable for the increase of cross section hardness and tensile strength and the decrease of difference in cross section hardness as well as improvement of section sensitivity.

关键词

水平连铸灰铸铁型材断面敏感性

Keywords

HCCHCC Gray Cast Iron BarsSection Sensitivity

references

Alert me when the article has been cited

提交

暂无数据