Relationship between Mould Wall Thickness and Wheel Wall Thickness in Low Pressure Casting Aluminum Alloy Wheel

Zhao Lihong1; Bi Tao2

Views : 0 下载量: 396 CSCD: 3

Export
Share
Collection
Album

Relationship between Mould Wall Thickness and Wheel Wall Thickness in Low Pressure Casting Aluminum Alloy Wheel
Vol. 31, Issue 3, Pages: 226-228(2011)
Published： 2011 ，
DOI：

扫描看全文

[1]赵丽红,毕涛.低压铸造铝合金轮毂铸型壁厚与铸件壁厚的关系[J].特种铸造及有色合金,2011,31(03):226-228+191.

Zhao Lihong1, Bi Tao2. Relationship between Mould Wall Thickness and Wheel Wall Thickness in Low Pressure Casting Aluminum Alloy Wheel. [J]. Special Casting & Nonferrous Alloys 31(3):226-228(2011)
[1]赵丽红,毕涛.低压铸造铝合金轮毂铸型壁厚与铸件壁厚的关系[J].特种铸造及有色合金,2011,31(03):226-228+191. DOI：

Zhao Lihong1, Bi Tao2. Relationship between Mould Wall Thickness and Wheel Wall Thickness in Low Pressure Casting Aluminum Alloy Wheel. [J]. Special Casting & Nonferrous Alloys 31(3):226-228(2011) DOI：

摘要

依据数学理论和低压铸造原理

提出模具壁厚和铸件壁厚存在着δt/h=3λ/2cλw的比例关系时

液态金属流过铸型表面才能达到最大的温度梯度。低压铸造铝合金轮毂热节处δt/h=1.8～2.2时

有利于轮辋的补缩和热节处的凝固。通过实际生产和有限元模拟分析对铸型壁厚与铸件壁厚的上述关系进行了验证。

Abstract

Based on mathematical principle and low pressure casting principle

when function relation between mould wall thickness and wheel wall thickness is δth=32λcλw

liquid metal can obtain the maximum temperature gradient on the mould surface. When δth is 1.8～2.2 at hot spot of low pressure casting aluminum alloy wheel

it is beneficial for rim feeding and solidification of hot spot

which is effectively verified by practical production and FEM analysis.