Preparation of Semi-solid Alloy Slurry by New Technology with High Efficient and Energy-saving

Liu Zheng1; Mao Weimin2

Views : 0 下载量: 183 CSCD: 5

Export
Share
Collection
Album

Preparation of Semi-solid Alloy Slurry by New Technology with High Efficient and Energy-saving
Vol. 31, Issue 3, Pages: 197-200(2011)
Published： 2011 ，
DOI：

扫描看全文

[1]刘政,毛卫民.高效节能制备半固态合金浆料的新工艺[J].特种铸造及有色合金,2011,31(03):197-200+189.

Liu Zheng1, Mao Weimin2. Preparation of Semi-solid Alloy Slurry by New Technology with High Efficient and Energy-saving. [J]. Special Casting & Nonferrous Alloys 31(3):197-200(2011)
[1]刘政,毛卫民.高效节能制备半固态合金浆料的新工艺[J].特种铸造及有色合金,2011,31(03):197-200+189. DOI：

Liu Zheng1, Mao Weimin2. Preparation of Semi-solid Alloy Slurry by New Technology with High Efficient and Energy-saving. [J]. Special Casting & Nonferrous Alloys 31(3):197-200(2011) DOI：

摘要

应用高效节能的工艺制备了半固态合金浆料

该工艺采用了低过热度浇注和弱电磁搅拌。研究了主要工艺参数对半固态合金浆料的影响。结果表明

低过热度浇注和弱电磁搅拌工艺可制备满足流变成形所需的半固态合金浆料

浇注温度和搅拌功率显著影响初生α-Al晶粒的形貌和尺寸。通过对合金熔体的弱电磁搅拌

可适当提高低过热度浇注的温度

实现高效和节能的目的。

Abstract

Semi-solid slurry was prepared by an efficient and energy-saving technology that is superheat pouring and slightly electromagnetic stirring（LSPSES）.Effects of the key processing parameters on the slurry were investigated.The results indicate that slurry meeted rheo-forming requirements can be prepared sucessfully by LSPSES.Morphology and size of primary α-Al phase in the semi-solid slurry are closely related with pouring temperature and stirring power.Through the proper weak electromagnetic stirring

pouring temperature of melt can be suitable raised to realize the high efficient and energy-saving.