Simulation of Liquid Metal Flow Behavior in Chamber of Cold Chamber Die Casting Machine

Xia Jiansheng; Dou Shasha

Views : 0 下载量: 119 CSCD: 2

Export
Share
Collection
Album

Simulation of Liquid Metal Flow Behavior in Chamber of Cold Chamber Die Casting Machine
Vol. 31, Issue 8, Pages: 734-736(2011)
Published： 2011 ，
DOI：

扫描看全文

[1]夏建生,窦沙沙.冷室压铸机压室内液体金属流动行为的模拟[J].特种铸造及有色合金,2011,31(08):734-736.

Xia Jiansheng, Dou Shasha. Simulation of Liquid Metal Flow Behavior in Chamber of Cold Chamber Die Casting Machine. [J]. Special Casting & Nonferrous Alloys 31(8):734-736(2011)
[1]夏建生,窦沙沙.冷室压铸机压室内液体金属流动行为的模拟[J].特种铸造及有色合金,2011,31(08):734-736. DOI：

Xia Jiansheng, Dou Shasha. Simulation of Liquid Metal Flow Behavior in Chamber of Cold Chamber Die Casting Machine. [J]. Special Casting & Nonferrous Alloys 31(8):734-736(2011) DOI：

摘要

以冷室压铸机压室直径、充填率、冲头速度及加速度为参数进行四因素三水平正交试验

用FLOW-3D软件模拟不同的参数对压室内铝合金液体金属流动过程的影响

发现冲头速度影响最为显著。

Abstract

The orthogonal testing of four factor-three levels

such as chamber diameter

filling rate

punching velocity

and acceleration in cold chamber die casting machine was carried out.Effects of different parameters on liquid aluminum alloy flow behavior in chamber were visualized by Flow-3D software.The results show that punching velocity is the dominant factor.