Preparation of SiC<sub>p</sub>/ZL105 Composites by High Intensity Ultrasonic Vibration under Semi-solid Temperature

Zhang Yangui; Cheng Hefa; Huang Xiaomei; Wu Jin; Hu Zhijun

Views : 0 下载量: 157 CSCD: 2

Export
Share
Collection
Album

Preparation of SiC_p/ZL105 Composites by High Intensity Ultrasonic Vibration under Semi-solid Temperature
Vol. 31, Issue 4, Pages: 363-366(2011)
Published： 2011 ，
DOI：

扫描看全文

[1]张燕瑰,程和法,黄笑梅,吴进,胡志君.高能超声半固态复合法制备SiC_p/ZL105复合材料[J].特种铸造及有色合金,2011,31(04):363-366+398.

Zhang Yangui, Cheng Hefa, Huang Xiaomei, et al. Preparation of SiC_p/ZL105 Composites by High Intensity Ultrasonic Vibration under Semi-solid Temperature. [J]. Special Casting & Nonferrous Alloys 31(4):363-366(2011)
[1]张燕瑰,程和法,黄笑梅,吴进,胡志君.高能超声半固态复合法制备SiC_p/ZL105复合材料[J].特种铸造及有色合金,2011,31(04):363-366+398. DOI：

Zhang Yangui, Cheng Hefa, Huang Xiaomei, et al. Preparation of SiC_p/ZL105 Composites by High Intensity Ultrasonic Vibration under Semi-solid Temperature. [J]. Special Casting & Nonferrous Alloys 31(4):363-366(2011) DOI：

摘要

用渗流法制备高SiCp体积分数的预制块

再用超声波搅拌稀释的方法制备SiCp/ZL105复合材料

研究了超声波处理过程工艺参数对复合材料微观组织、性能的影响。结果表明

渗流法可以制备SiCp含量达55%～60%的预制块

采用超声波搅拌稀释预制块方法制备的SiCp/ZL105复合材料中SiCp含量为9%～23%

SiCp分散均匀

与基体结合良好;随着SiCp含量的增加

复合材料硬度提高

耐磨性能提高。

Abstract

SiCp/ZL105 composites were fabricated by ultrasonic vibration diluting high SiC volumetric fraction SiCp/ZL105 preforms which was prepared by pressure infiltration process.Effects of ultrasonic vibration processing parameters on microstructure and performance of the composites were investigated.The results reveal that SiC volumetric fraction can reach up to 55%～60% in pressure nitrated preforms

and SiC volumetric fraction in SiCp/ZL105 composites prepared by ultrasonic vibration diluting preforms can reach up to 9%～23%

in which uniformly dispersed SiC particle exhibits desirable bonding with the matrix.With increasing in SiC particles

hardness and wear resistance of the composites are obviously improved.

关键词

SiCp/ZL105复合材料加压渗流法高能超声波显微组织硬度耐磨性

Keywords

SiCp/ZL105 CompositesPressure Infiltrating ProcessHigh-intensity UltrasonicMicrostructureHardnessWear Resistance

references

Alert me when the article has been cited

提交

Microstructure and Wear Resistance of Oral Ti-Zr-（M） Titanium Alloy

Microstructure and Properties of WC Particle Reinforced Steel Matrix Composites Prepared by Gas Tungsten Arc Welding

Highly Wear-resistant and Crack-free Double-layer Fe-based Amorphous Composite Coatings by Laser Cladding

Study on Microstructure and Hardness of Ni-Cu-P Alloy

Hybrid Reinforced AZ91 Mg Alloy Composites

Preparation of SiCp/ZL105 Composites by High Intensity Ultrasonic Vibration under Semi-solid Temperature

DOI：

摘要

Abstract

关键词

Keywords

references

Preparation of SiC_p/ZL105 Composites by High Intensity Ultrasonic Vibration under Semi-solid Temperature