Effects of Si Content on Friction and Wear Performance of In-situ Mg<sub>2</sub>Si/AM60 Composites

Views : 0 下载量: 108 CSCD: 2

Effects of Si Content on Friction and Wear Performance of In-situ Mg₂Si/AM60 Composites
Vol. 31, Issue 10, Pages: 952-954(2011)
Published： 2011 ，
DOI：

扫描看全文

[1]吴孝泉.Si对原位自生镁基复合材料摩擦磨损性能的影响[J].特种铸造及有色合金,2011,31(10):952-954.

Wu Xiaoquan. Effects of Si Content on Friction and Wear Performance of In-situ Mg₂Si/AM60 Composites. [J]. Special Casting & Nonferrous Alloys 31(10):952-954(2011)
[1]吴孝泉.Si对原位自生镁基复合材料摩擦磨损性能的影响[J].特种铸造及有色合金,2011,31(10):952-954. DOI：

Wu Xiaoquan. Effects of Si Content on Friction and Wear Performance of In-situ Mg₂Si/AM60 Composites. [J]. Special Casting & Nonferrous Alloys 31(10):952-954(2011) DOI：

采用原位法制备Mg2Si/AM60复合材料

研究了不同质量分数的Si粉对Mg2Si/AM60复合材料摩擦磨损性能的影响。结果表明

Si质量分数增加

复合材料硬度增加

其磨损量随之减小

磨损性能得到显著加强。外加载荷增大

复合材料磨损量持续增加。与基体AM60相比

Mg2Si/AM60复合材料有效推迟微量磨损向严重磨损转变的时间。

Effects of Si contents on friction and wear performance of in-situ Mg2Si/AM60 composites were investigated. It is found that

with increasing in Si content

the weight loss of the composites is decreased as a result of the increase of the hardness

greatly improving the wear behavior of the composites. With the loading increase

the weight loss of the composites is increased. Compared with AM60 matrix

the transformation time of trace-wear into severe wear of the composites is effectively postponed.

原位镁基复合材料摩擦磨损

In-SituMagnesium AlloyFriction and Wear

Alert me when the article has been cited

提交

Effects of Si Content on Friction and Wear Performance of In-situ Mg2Si/AM60 Composites