Effects of Electro-Slag Refining Treatment on Mechanical Properties of ZL205A

Xiao Tigang; Dang Jingzhi; Tang Zhe

Views : 0 下载量: 100 CSCD: 2

Export
Share
Collection
Album

Effects of Electro-Slag Refining Treatment on Mechanical Properties of ZL205A
Vol. 31, Issue 12, Pages: 1167-1169(2011)
Published： 2011 ，
DOI：

扫描看全文

[1]肖体刚,党惊知,唐哲.电渣净化对ZL205A力学性能的影响[J].特种铸造及有色合金,2011,31(12):1167-1169.

Xiao Tigang, Dang Jingzhi, Tang Zhe. Effects of Electro-Slag Refining Treatment on Mechanical Properties of ZL205A. [J]. Special Casting & Nonferrous Alloys 31(12):1167-1169(2011)
[1]肖体刚,党惊知,唐哲.电渣净化对ZL205A力学性能的影响[J].特种铸造及有色合金,2011,31(12):1167-1169. DOI：

Xiao Tigang, Dang Jingzhi, Tang Zhe. Effects of Electro-Slag Refining Treatment on Mechanical Properties of ZL205A. [J]. Special Casting & Nonferrous Alloys 31(12):1167-1169(2011) DOI：

摘要

利用万能力学试验机测量了经电渣净化后的ZL205A的抗拉强度和伸长率。结果发现

经电渣净化后的ZL205A的抗拉强度和伸长率大幅下降。利用直读光谱仪分析净化后试样的成分

发现净化后的ZL205A中Ti含量减少近48%。通过在净化后的铝熔体中补加Al-Ti中间合金

测量试样的力学性能

发现其抗拉强度为486.29MPa

和净化前的相当

但伸长率为11%

比净化前提高了100%。

Abstract

Tensile strength and elongation of ZL205A purified by electro slag were measured with universal mechanical testing machine.The results show that tensile strength and elongation of ZL205A after purification are decreased greatly.The chemical composition of the sample purified was analyzed by direct-reading spectrometer.The results indicate that Ti content is decreased by approximately 48% in purified ZL205A.Through adding Al-Ti master alloy in purified aluminum melt

tensile strength reaches up to 486.29MPa

which is equal to that of the alloy before purification treatment

and elongation is 11%

increased by 100%.