Comparison of Aluminum Foams Produced by Melt Forming and Gas Injection Processes

Li Yanxiang

切换中文

Views : 57 Downloads: 450 CSCD: 1

Export
Share with wechat friends or circle of friends

Share
Collection
Album

Comparison of Aluminum Foams Produced by Melt Forming and Gas Injection Processes
- role： First author 第一作者
- Affiliation：
  Key Laboratory for Advanced Materials Processing,Ministry of Education, Department of Mechanical Engineering,Tsinghua University
Li Yanxiang
1
Vol. 31, Issue 12, Pages: 1097-1099(2011)
Published： 2011 ，
DOI：

Scan for full text

Quote
[1]李言祥.熔体发泡法和吹气法制备泡沫铝的比较研究[J].特种铸造及有色合金,2011,31(12):1097-1099.

Li Yanxiang. Comparison of Aluminum Foams Produced by Melt Forming and Gas Injection Processes. [J]. Special Casting & Nonferrous Alloys 31(12):1097-1099(2011)
[1]李言祥.熔体发泡法和吹气法制备泡沫铝的比较研究[J].特种铸造及有色合金,2011,31(12):1097-1099. DOI：

Li Yanxiang. Comparison of Aluminum Foams Produced by Melt Forming and Gas Injection Processes. [J]. Special Casting & Nonferrous Alloys 31(12):1097-1099(2011) DOI：

Full Text(HTML)
References
Publication Info
Metrics

Abstract

Aluminum foams produced by melt forming and gas injection processes were comparatively investigated,including fabrication procedure,foam structure,microstructure of cell wall,porosity and pore size,performance,and application,which provided a reference to appropriate selection of fabricating process in production and application.

transl

Keywords

Aluminum Foam; Melt Forming; Gas Injection Forming

transl

摘要

比较研究了熔体发泡法和吹气法制备泡沫铝的工艺过程、泡沫结构特点、泡壁凝固组织、气孔率和气孔尺寸、性能特点和应用。为实际生产和应用中合理选择泡沫铝的制备方法提供参考。

Abstract

Aluminum foams produced by melt forming and gas injection processes were comparatively investigated

including fabrication procedure

foam structure

microstructure of cell wall

porosity and pore size

performance

and application

which provided a reference to appropriate selection of fabricating process in production and application.

关键词

泡沫铝熔体发泡法吹气法

Keywords

Aluminum FoamMelt FormingGas Injection Forming

references

Alert me when the article has been cited

Submit

Preparation of Aluminum Foam by Gas Injection Foaming

The Bottleneck of Industrialization for Aluminum Foam-Vesicant

Fabrication of Aluminum Foam with High Density and Small Aperture

Related Author

Xu Fangming 清华大学机械工程系先进成形制造教育部重点实验室

Wang Qian 清华大学机械工程系先进成形制造教育部重点实验室

Xu Qingyan 清华大学机械工程系先进成形制造教育部重点实验室

Xiong Shoumei 清华大学机械工程系先进成形制造教育部重点实验室

Yang Hao 中国船舶重工集团公司第七二五研究所泡沫铝研制中心

Zhang Yingyuan 中国船舶重工集团公司第七二五研究所泡沫铝研制中心

Huang Bin 陕西理工学院材料科学与工程学院

Song Peiwei 陕西理工学院材料科学与工程学院

Related Institution

Department of Mechanical Engineering,Tsinghua University

CSIC,Center for Aluminum Foam Luoyang Ship Material Research Institute

College of Materials Science and Engineering,Shaanxi University of Technology

⁰