冲头式挤压铸造工艺参数对ZA27合金力学性能的影响

于海朋; 张重远; 李荣德; 尹井田

浏览量 : 0 下载量: 52 CSCD: 5

导出
分享
收藏
专辑

冲头式挤压铸造工艺参数对ZA27合金力学性能的影响
Effect of Punching Squeeze Casting Processing on Mechanical Property for ZA27 Alloy
2002年第S1期页码：217-218
纸质出版日期： 2002 ，
DOI：

扫描看全文

于海朋, 张重远, 李荣德, 等. 冲头式挤压铸造工艺参数对ZA27合金力学性能的影响[J]. 特种铸造及有色合金杂志, 2002,(S1):217-218.

Yu Haipeng Zhang Zhongyuan Li Rongde Ying Jingtian. Effect of Punching Squeeze Casting Processing on Mechanical Property for ZA27 Alloy[J]. Special Casting & Nonferrous Alloys, 2002,(S1):217-218.
于海朋, 张重远, 李荣德, 等. 冲头式挤压铸造工艺参数对ZA27合金力学性能的影响[J]. 特种铸造及有色合金杂志, 2002,(S1):217-218. DOI：

Yu Haipeng Zhang Zhongyuan Li Rongde Ying Jingtian. Effect of Punching Squeeze Casting Processing on Mechanical Property for ZA27 Alloy[J]. Special Casting & Nonferrous Alloys, 2002,(S1):217-218. DOI：

摘要

采用正交试验分析了冲头式挤压铸造工艺参数对ZA2 7合金力学性能指标的影响。结果表明 :ZA2 7合金冲头式挤压铸造工艺参数影响的主次顺序为比压、铸型温度、浇注温度和保压时间。在适宜的工艺参数下ZA2 7合金力学性能可以达到 :σb=44 0MPa

δ5=12 %

HBS130

Abstract

The effect of experimental variables on the mechanical properties for ZA27 casting alloy during punching squeeze casting processing has been investigated on the basis of orthogonal experiment. The result shows the order of influential factors as:specific pressure

die temperature

pouring temperature and pressure holding time. At a proper valve of these factors

the mechanical property of the ZA27 alloy could reach σ b=440 MPa

δ s=12%

HBS130.