压铸工艺生产的铝基复合材料的组织和性能

龙思远; 李华基; 赵建华; 彭晓东

浏览量 : 0 下载量: 141 CSCD: 2

导出
分享
收藏
专辑

压铸工艺生产的铝基复合材料的组织和性能
Microstructure and Properties of Aluminum Matrix Composite by Die Casting Process
2002年第S1期页码：93-95
纸质出版日期： 2002 ，
DOI：

扫描看全文

龙思远, 李华基, 赵建华, 等. 压铸工艺生产的铝基复合材料的组织和性能[J]. 特种铸造及有色合金杂志, 2002,(S1):93-95.

Long Siyuan Li Huaji Zhao Jianhua Peng Xiaodong. Microstructure and Properties of Aluminum Matrix Composite by Die Casting Process[J]. Special Casting & Nonferrous Alloys, 2002,(S1):93-95.
龙思远, 李华基, 赵建华, 等. 压铸工艺生产的铝基复合材料的组织和性能[J]. 特种铸造及有色合金杂志, 2002,(S1):93-95. DOI：

Long Siyuan Li Huaji Zhao Jianhua Peng Xiaodong. Microstructure and Properties of Aluminum Matrix Composite by Die Casting Process[J]. Special Casting & Nonferrous Alloys, 2002,(S1):93-95. DOI：

摘要

报道了压铸浸渗法生产的γ Al2 O3 长纤维、δ Al2 O3 短纤维和SiC颗粒强化铝基复合材料的组织特征和强度性能检测结果。试验结果表明

采用优化工艺条件

在工业压铸机上可以生产出高浸渗质量、可热处理的铝基复合材料。所获复合材料与 13 0MPa挤压浸渗生产的复合材料相仿

具有理想的工艺质量和组织结构

强度性能达到或超过混合律的预测值。

Abstract

The characteristics of the microstructure and the strength properties of aluminum matrix composites reinforced with γ Al 2O 3 long fibre

δ Al 2O 3 chopped fibre or SiC particulate by die casting infiltration technique was studied.It is shown that Al matrix composites with high filtration quality and heat treated ability could be prepared with industrial die casting machine through the optimization of process condition. The composites

having ideal process quality?microstructure and strength properties up to or over prediction value by mixture law

are similar to those with 130 MPa tensile strength by squeezing infiltration technique.