用真空差压铸造法生产复杂薄壁铝合金铸件

董选普; 黄乃瑜; 吴树森; 樊自田

浏览量 : 0 下载量: 370 CSCD: 16

导出
分享
收藏
专辑

用真空差压铸造法生产复杂薄壁铝合金铸件
Production of Complicated and Thin-Walled Aluminum Alloy Castings by Vacuum Differential Pressure Casting
2001年第S1期页码：52-54
纸质出版日期： 2001 ，
DOI：

扫描看全文

[1]董选普,黄乃瑜,吴树森,樊自田.用真空差压铸造法生产复杂薄壁铝合金铸件[J].特种铸造及有色合金,2001(S1):52-54.

Dong Xuanpu Huan Naiyu Wu Shushen Fan Zitian. Production of Complicated and Thin-Walled Aluminum Alloy Castings by Vacuum Differential Pressure Casting[J]. Special Casting & Nonferrous Alloys, 2001,(S1):52-54.
[1]董选普,黄乃瑜,吴树森,樊自田.用真空差压铸造法生产复杂薄壁铝合金铸件[J].特种铸造及有色合金,2001(S1):52-54. DOI：

Dong Xuanpu Huan Naiyu Wu Shushen Fan Zitian. Production of Complicated and Thin-Walled Aluminum Alloy Castings by Vacuum Differential Pressure Casting[J]. Special Casting & Nonferrous Alloys, 2001,(S1):52-54. DOI：

摘要

对用真空差压铸造法生产的铝合金铸件性能进行了研究

从理论和实践量方面论述了其较好的铸件内在性能。该工艺与传统的重力铸造和真空吸铸相比

铸件强度得到了提高

铸件组织更加致密。适合于质量要求高、复杂程度高的铝合金铸件的生产

尤其适用于薄壁铸件的生产。

Abstract

The internal quality of aluminum alloy castings that were produced by Vacuum Differential Pressure Casting was studied with both theory and practice. The results show that the ultimate tensile strength of casting was higher and the cast microstructure was finer in VDPC than that in traditional gravity casting and vacuum suction casting

and VDPC has obvious superiorities in complicated and high qualified castings

especially in thin-walled castings.