TiC<sub>P</sub>/7075铝基复合材料的半固态触变成形工艺研究

刘慧敏; 格日乐; 张娟; 解瑞军; 刘军

复合材料 | 浏览量 : 0 下载量: 136 CSCD: 0

导出
分享
收藏
专辑

TiC_P/7075铝基复合材料的半固态触变成形工艺研究
Semi-solid Thixoforming of In-situ Reactive Spray Formed TiC_p/7075 Al matrix Composites
2007年第S1期页码：156-159
纸质出版日期： 2007 ，
DOI：

扫描看全文

[1]刘慧敏,格日乐,张娟,解瑞军,刘军.TiC_P/7075铝基复合材料的半固态触变成形工艺研究[J].特种铸造及有色合金,2007(S1):156-159.

Liu Huimin Ge Rile Zhang Juan Xie Ruijun Liu Jun. Semi-solid Thixoforming of In-situ Reactive Spray Formed TiC_p/7075 Al matrix Composites[J]. Special Casting & Nonferrous Alloys, 2007,(S1):156-159.
[1]刘慧敏,格日乐,张娟,解瑞军,刘军.TiC_P/7075铝基复合材料的半固态触变成形工艺研究[J].特种铸造及有色合金,2007(S1):156-159. DOI：

Liu Huimin Ge Rile Zhang Juan Xie Ruijun Liu Jun. Semi-solid Thixoforming of In-situ Reactive Spray Formed TiC_p/7075 Al matrix Composites[J]. Special Casting & Nonferrous Alloys, 2007,(S1):156-159. DOI：

摘要

采用原位反应喷射沉积法制备TiCP/7075铝基复合材料

进行半固态触变成形试验。研究TiCP/7075铝基复合材料的半固态触变成形性及其成形后的微观组织与力学性能。结果表明

该材料具有良好的半固态触变成形性

在成形压力仅为20

5MPa的条件下

就能够进行半固态触变成形。在625℃进行半固态触变成形后

其组织仍能保持均匀的等轴晶特征

平均晶粒尺寸分布于30

0μm;半固态触变成形试件经T6处理后其硬度达到（HRB）82

5。

Abstract

The thixoformability of in-situ reactive spray formed TiCP/7075 Al matrix composites was studied and the microstructures and mechanical property of thixoforming products were also investigated.In-situ reactive spray formed TiCP/7075 Al matrix composites showed good thixoforming behaviour.The matrix composites could be thixoformed at a pressure as low as 20～25 MPa.After the semi-solid processing at 625 ℃

the matrix composites kept the equiaxed grain features with an average grain size between 30～40 μm.Hardness of the thixoformed matrix composites was 82～85HRB

after T6 treatment.

关键词

半固态触变成形原位反应喷射沉积TiC/7075铝基复合材料

Keywords

Semi-solid ThixoformingIn-situ Reactive Spray DepositionTiCP/7075 Al Matrix Composites

references

文章被引用时，请邮件提醒。

提交

轻合金半固态成形的研究进展

TiC_P/7075铝基复合材料的半固态触变成形

TiCP/7075铝基复合材料的半固态触变成形工艺研究

Semi-solid Thixoforming of In-situ Reactive Spray Formed TiCp/7075 Al matrix Composites

DOI：

摘要

Abstract

关键词

Keywords

references

TiC_P/7075铝基复合材料的半固态触变成形工艺研究

Semi-solid Thixoforming of In-situ Reactive Spray Formed TiC_p/7075 Al matrix Composites