搅熔复合-挤压铸造法制备SiCp/2A14复合材料

费良军; 朱秀荣; 徐永东; 王荣; 沈建明

挤压铸造 | 浏览量 : 0 下载量: 123 CSCD: 5

导出
分享
收藏
专辑

搅熔复合-挤压铸造法制备SiCp/2A14复合材料
Study on SiCp/2A14 Aluminum Matrix Composite Made by Stirring Compound and Squeeze Casting
2007年第S1期页码：277-279
纸质出版日期： 2007 ，
DOI：

扫描看全文

[1]费良军,朱秀荣,徐永东,王荣,沈建明.搅熔复合-挤压铸造法制备SiCp/2A14复合材料[J].特种铸造及有色合金,2007(S1):277-279.

Fei Liangjun Zhu Xiourong Xu Yondong Wang Rong Shen Jianming. Study on SiCp/2A14 Aluminum Matrix Composite Made by Stirring Compound and Squeeze Casting[J]. Special Casting & Nonferrous Alloys, 2007,(S1):277-279.
[1]费良军,朱秀荣,徐永东,王荣,沈建明.搅熔复合-挤压铸造法制备SiCp/2A14复合材料[J].特种铸造及有色合金,2007(S1):277-279. DOI：

Fei Liangjun Zhu Xiourong Xu Yondong Wang Rong Shen Jianming. Study on SiCp/2A14 Aluminum Matrix Composite Made by Stirring Compound and Squeeze Casting[J]. Special Casting & Nonferrous Alloys, 2007,(S1):277-279. DOI：

摘要

采用搅熔复合-挤压铸造工艺制备SiCp/2A14复合材料

分析研究了搅熔复合时间对颗粒分布状态的影响

并对比测试了2A14基体铝合金和SiCp/2A14复合材料的性能。经T6处理后

与2A14基体铝合金相比

15%SiCp/2A14复合材料具有较高硬度和弹性模量

相当的密度和抗拉强度

较低的伸长率。

Abstract

The SiCp/2A14 aluminum matrix composite was made by stirring compound and squeeze casting.The relationship between time of stirring compound and particle distibution was studied

The properties of 2A14 Al alloy and SiCp/2A14 composite were tested。After the T6 heated processing

Compared with the 2A14 Al alloy

15%SiCp/2A14 composite had the higher hardness and elastic modulus

the equivalent density and tensile strength

the lower coefficient of elongation.