硅锰钢中夹杂物应力场数值模拟

刘宗发; 谢敬佩; 徐红玉; 李继文

计算机应用技术 | 浏览量 : 0 下载量: 211 CSCD: 2

导出
分享
收藏
专辑

硅锰钢中夹杂物应力场数值模拟
Numerical Simulation of Stress Field in Si-Mn Steel with Inclusions
2007年第5期页码：357-359
纸质出版日期： 2007 ，
DOI：

扫描看全文

[1]刘宗发,谢敬佩,徐红玉,李继文.硅锰钢中夹杂物应力场数值模拟[J].特种铸造及有色合金,2007(05):357-359+325.

Liu Zongfa, Xie Jingpei, Xu Hongyu, et al. Numerical Simulation of Stress Field in Si-Mn Steel with Inclusions[J]. Special Casting & Nonferrous Alloys, 2007,(5):357-359.
[1]刘宗发,谢敬佩,徐红玉,李继文.硅锰钢中夹杂物应力场数值模拟[J].特种铸造及有色合金,2007(05):357-359+325. DOI：

Liu Zongfa, Xie Jingpei, Xu Hongyu, et al. Numerical Simulation of Stress Field in Si-Mn Steel with Inclusions[J]. Special Casting & Nonferrous Alloys, 2007,(5):357-359. DOI：

摘要

采用ANSYS有限元分析软件

建立含不同种类、形态夹杂物的硅锰钢有限元模型

计算在单向拉伸状态下含夹杂物的硅锰钢应力场分布

进而从宏观力学角度分析夹杂物的力学行为。结果表明

夹杂物和基体的弹性模量的差距及夹杂物的形态

对试样内的应力集中程度及最大应力影响最显著。

Abstract

The mechanical properties of the steel is controlled by types

morphology

amounts

size and distribution of inclusions in the Si-Mn steel. Finite element model of Si-Mn alloy with various types and morphologies inclusions have been established to simulate the stress distribution in Si-Mn alloy with inclusions in the condition of tension and to analyze the mechanical behavior of inclusion in macro-mechanical properties based on ANSYS software. It was revealed that the stress concentration and maximum stress in the Si-Mn alloy samples are mainly affected by the gradient of elastic modulus between inclusions and the matrix and the morphologies of the inclusions