Study on the Numerical Simulation Method for Semi-solid Thixocasting Process

Gao Zhiqiang  Wang Yunhua  Su Huaqin

Views : 0 下载量: 119 CSCD: 4

Export
Share
Collection
Album

Study on the Numerical Simulation Method for Semi-solid Thixocasting Process
Issue S1, Pages: 236-238(2002)
Published： 2002 ，
DOI：

扫描看全文

[1]高志强,,,,,,,,,,王云华,苏华钦.半固态合金触变铸造数值模拟方法的研究[J].特种铸造及有色合金,2002(S1):236-238+244.

Gao Zhiqiang Wang Yunhua Su Huaqin. Study on the Numerical Simulation Method for Semi-solid Thixocasting Process. [J]. Special Casting & Nonferrous Alloys (S1):236-238(2002)
[1]高志强,,,,,,,,,,王云华,苏华钦.半固态合金触变铸造数值模拟方法的研究[J].特种铸造及有色合金,2002(S1):236-238+244. DOI：

Gao Zhiqiang Wang Yunhua Su Huaqin. Study on the Numerical Simulation Method for Semi-solid Thixocasting Process. [J]. Special Casting & Nonferrous Alloys (S1):236-238(2002) DOI：

摘要

总结了铸造成形过程常用的数值模拟方法

分析了半固态合金触变铸造的主要特点

认为局部网格细化的拉格朗日法（LagrangianMethod）比尤拉法（EulerianMethod）更适合于半固态合金触变铸造过程的数值模拟。对其算法进行了探讨

并给出了一个算例

Abstract

The numerical methods widely adopted in simulating casting process are summarized in this paper

and the main characteristics of semi solid alloy thixocasting are analyzed. It came to conclusion that the Lagrangian method with locally refined mesh is more effective to simulate this forming process when compared to Eulerian method. Finally

an approach to its algorithm is given.