Analyses of Shearing Strain Characteristic and Microstructure on Semi-Solid ZA27 Alloy

Yan Fengyun Hao Yuan Li Yuandong Chen Tijun

Views : 0 下载量: 59 CSCD: 2

Export
Share
Collection
Album

Analyses of Shearing Strain Characteristic and Microstructure on Semi-Solid ZA27 Alloy
Issue S1, Pages: 254-257(2001)
Published：2001
DOI：
稿件说明：

移动端阅览

[1]阎峰云,郝远,李元东,陈体军.半固态ZA27合金剪切应变特征与显微组织分析[J].特种铸造及有色合金,2001(S1):254-257. DOI：

Yan Fengyun Hao Yuan Li Yuandong Chen Tijun. Analyses of Shearing Strain Characteristic and Microstructure on Semi-Solid ZA27 Alloy[J]. Special Casting & Nonferrous Alloys, 2001, (S1): 254-257. DOI：

摘要

采用静态压力试验方法

在不同的温度和载荷下

对半固态ZA27合金的金属型和砂型试样的静态剪切应变特征曲线进行了测试和比较。发现在半固态温度高于430℃时

金属型试样的应力水平明显低于砂型

而且进入触变成型的时间短。比较481℃变形组织演变过程

发现起初金属型的液相转化速度慢于砂型

而保温15 min后液相较多

且枝晶明显细化。

Abstract

The shearing strain characteristic and microstructure of the semi-solid samples fabricated by sand mould and permanent mould were tested and compared by an improved compress testing equipment at different temperatures and loads. The results showed that the strain values of permanent mould s samples are much lower than sand mould s above 430℃ and the holding time is shorter when permanent mould’ s samples come into stage of the thixoforming. Compared with the microstructure of those samples after deformation at 481 ℃

the rate of volume fraction of producing liquid for the samples fabricated by permanent mould is slower than that of the sand mould samples at the initial stage

and the volume fractions of liquid increase rapidly and dendritic structures are becoming refining after 15 minutes.