Semi-solid Forming of a Damper Housing with Dendritic and Non-dendritic Al-Si-Mg Alloy

ChenCM; YangCC; ChaoCG

Views : 0 下载量: 30 CSCD: 0

Export
Share
Collection
Album

Semi-solid Forming of a Damper Housing with Dendritic and Non-dendritic Al-Si-Mg Alloy
Issue S1, Pages: 160-163(2001)
Published：2001
DOI：
稿件说明：

移动端阅览

[1]ChenCM,,,,,,,,,,YangCC,,,,,,,,,,ChaoCG.Semi-solid Forming of a Damper Housing with Dendritic and Non-dendritic Al-Si-Mg Alloy[J].特种铸造及有色合金,2001(S1):160-163. DOI：

ChenCM, YangCC, ChaoCG. Semi-solid Forming of a Damper Housing with Dendritic and Non-dendritic Al-Si-Mg Alloy[J]. Special Casting & Nonferrous Alloys, 2001, (S1): 160-163. DOI：

摘要

<正> A motorcycle component of damper housing was made by semi-solid forming process. This was used to investigate the effect of microstructures of feedstock on the formability of semisolid process. The soundness and microstructures of casting parts made by dendritic and non-dendritic feedstock were investigated. Separating of liquid phase was found in the casting produced by dendritic feedstock

which might result in defects of porosity

while uniform microstructures were found in the casting produced by non-dendritic feedstock.

Abstract

A motorcycle component of damper housing was made by semi-solid forming process. This was used to investigate the effect of microstructures of feedstock on the formability of semisolid process. The soundness and microstructures of casting parts made by dendritic and non-dendritic feedstock were investigated. Separating of liquid phase was found in the casting produced by dendritic feedstock

which might result in defects of porosity

while uniform microstructures were found in the casting produced by non-dendritic feedstock.

关键词

Keywords

references

Alert me when the article has been cited

提交

暂无数据