Microstructure and Properties of Al-Fe Die Casting Alloy

Zhang Shijiao1 Bian Xiufang1 Jing Yuangao2 Li Zhenkuan1 Wang Caidong1

Views : 0 下载量: 208 CSCD: 1

Export
Share
Collection
Album

Microstructure and Properties of Al-Fe Die Casting Alloy
Issue S1, Pages: 207-210(2007)
Published： 2007 ，
DOI：

扫描看全文

[1]张士佼,边秀房,景元高,李贞宽,王才东.压铸铝铁合金的组织与性能[J].特种铸造及有色合金,2007(S1):207-210.

Zhang Shijiao1 Bian Xiufang1 Jing Yuangao2 Li Zhenkuan1 Wang Caidong1. Microstructure and Properties of Al-Fe Die Casting Alloy. [J]. Special Casting & Nonferrous Alloys (S1):207-210(2007)
[1]张士佼,边秀房,景元高,李贞宽,王才东.压铸铝铁合金的组织与性能[J].特种铸造及有色合金,2007(S1):207-210. DOI：

Zhang Shijiao1 Bian Xiufang1 Jing Yuangao2 Li Zhenkuan1 Wang Caidong1. Microstructure and Properties of Al-Fe Die Casting Alloy. [J]. Special Casting & Nonferrous Alloys (S1):207-210(2007) DOI：

摘要

采用高倍显微组织观察、力学性能测试等手段

讨论了铝铁系合金在压铸条件下的组织、性能

以及压铸过程中存在的问题。研究结果表明

压铸铝铁合金性能可达到σb=242.3MPa

δ=2.7%

显微组织中存在尺寸小的短棒状相

而且压铸试棒组织呈圆环带状分布。

Abstract

Microstructure and properties of Al-Fe alloy by die casting and the problem existed in-process were studied by observation of microstructure and testing of mechanical property.Maxi tensile strength of Al-Fe alloy σb is 242.3 MPa

and elongation δ is 2.7%.Intermetallic compound of small size present claviform

and distribute ring and banding in diecasting test bar.It indicates that Al-Fe diecasting alloy will be applicated in many fields and has good market foreground.