您好,欢迎进入特种铸造及有色合金杂志社的网站

首页  >>  文章索引   >>  压力铸造压力铸造

电动压铸机合模机构的优化设计
作者:宫杨杨 张亚军 庄 俭   作者单位:北京化工大学   期刊:特种铸造及有色合金
关键字:   出版单位:特铸杂志社

作者简介

中文摘要

摘要:根据电动5支点斜排肘杆式压铸机的特点与要求,建立了合模机构的数学模型。使用正态分布的概率累积函数构建优化目标函数,设定主要性能参数的期望值与波动量,设置优化的约束条件,按照有约束非线性最优化的求解方法对合模机构进行系统性优化。分析表明,优化后机构力的放大比提高了约39.7%,达到24.3;行程比为1.06,较为理想;最大开模行程可达381.4 mm,有所增大;运动曲线平缓、冲击小,整体性能更加适合电动压铸机。

关键词:电动;合模系统;肘杆式;优化设计

中图分类号:TG249.2;TG233+.1    文献标志码:A    DOI10.15980/j.tzzz.2017.05.010

 

发布日期:2017年第37卷第05

英文摘要

gn for Toggle Clamping Mechanism of Electric Die Casting Machine

Gong Yangyang, Zhang Yajun, Zhuang Jian, Yang Yuguang, Jin Zhiming

(College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology)

Abstract:According to the characteristics and requirements of allelectric fivepoint oblique toggle die casting machine, the mathematical models of toggle clamps were established. Cumulative function of normal distribution was used to construct the objective function. Expectations and the amount of fluctuation of the main performance parameters were determined, and the optimization constraint was set. Based on the method for solving constrained nonlinear optimization, the mold closing mechanism was optimized systematically. The results show that the force amplification ratio is enhanced greatly after optimization designand the overall performance is more suitable for electric die casting machines.

 

Key Words:: Electric, Clamping System, Toggle Clamp, Optimization Design

相关文章



设为首页 | 加入收藏 | 访问统计

版权所有:《特种铸造及有色合金》杂志社(武汉) 电话:027-85358206 027-85486024 传真:027-8535812 备案信息:鄂ICP备15003736号 网站建设武汉网户

鄂公网安备 42010302000230号