您好,欢迎进入特种铸造及有色合金杂志社的网站

首页  >>  文章索引   >>  压力铸造压力铸造

铝合金箱体低压铸造数值模拟及其优化设计
作者:王 群   作者单位:中国兵器科学研究院宁波分院   期刊:特种铸造及有色合金
关键字:   出版单位:特铸杂志社

作者简介

中文摘要

摘要通过对铝合金箱体结构及低压铸造工艺特性的分析,合理设计浇注系统,并利用ProCAST软件对充型和凝固过程温度场进行数值模拟,发现充型过程流动平稳,温度场较为均匀,但在凝固过程中由于结构的复杂性,在厚壁及热节处出现缩松缺陷。在改进方案中,通过在铸件厚壁处设置冷铁和增大横浇道出口截面积等措施,缩短凝固时间,强化补缩通道,最终通过工业CT断层扫描检测,获得无铸造缺陷的高品质铸件。

关键词低压铸造;数值模拟;缩孔、缩松;优化设计

中图分类号TG146.21TG249.2  文献标志码A DOI:10.15980/j.tzzz.2017.03.014

 

发布日期2017年第37卷第3

英文摘要

Numerical Simulation and Design Optimization of Low Pressure Casting Process for Aluminum Alloy Case

Wang Qun1Sun Zhanchun2Fan Yunbo1

1.Ningbo Branch of China Ordnance Academy;2.China North Vehicle Research Institute

Abstract:It is reasonable to design gating system according to analysis of low pressure casting aluminum alloy case structure and characteristics. It is flown smoothly in the filling process with uniform temperature field distribution by using the ProCAST software, however, due to structure complexity, there exist a lot of shrinkage porosity defect in the thick wall and hot spot position during solidification process. In the optimized scheme, by setting cold iron at the thick wall of the case and increasing sectional area of the runner exit, solidification time was shortened and the feeding channel was enhanced. High quality aluminum alloy case without defects was produced by industrial CT tomography detection.

 

Key Words: Low Pressure Casting, Numerical Simulation, Shrinkage Porosities, Design Optimization

相关文章



设为首页 | 加入收藏 | 访问统计

版权所有:《特种铸造及有色合金》杂志社(武汉) 电话:027-85358206 027-85486024 传真:027-8535812 备案信息:鄂ICP备15003736号 网站建设武汉网户

鄂公网安备 42010302000230号