您好,欢迎进入特种铸造及有色合金杂志社的网站

首页  >>  文章索引   >>  压力铸造压力铸造

压铸ADC12转向器数值模拟及微观孔洞的研究
作者:杨润生   作者单位:华南理工大学   期刊:特种铸造及有色合金
关键字:   出版单位:特铸杂志社

作者简介

中文摘要

针对实际铝合金转向器压铸件,运用JSCAST软件对其充型及凝固过程进行模拟,采用三维X射线断层扫描技术得到了铸件中微观孔洞的形貌特征、尺寸大小及分布规律,并与模拟结果进行了对比验证与分析。结果表明,转向器铸件中主要为小体积的孔洞,其等体积球直径为0.261~0.288 mm;气缩孔和缩孔尺寸较大,主要分布在铸件壁厚较大的两个安装孔和形状复杂的齿条与齿轮轴连接处。铸件中间部位由于金属液汇流,产生大量的气孔。

关键词ADC12压铸件;数值模拟;三维X射线断层扫描;微观孔洞

中图分类号TG146.21TG249.2 文献标志码:A      DOI10.15980/j.tzzz.2017.01.019

 

发布日期2017年第37卷第01

英文摘要

Numerical Simulation and Microporosity of Die Casting ADC12 Steering Gear

Yang Runsheng, Zhao Haidong, Li Shihua, Gao Junmin, Wang Junyou2

\[1.National Engineering Research Center of Near-net-shape Forming for Metallic Materials,South China University of Technology; 2. Hongbang Die Casting (Nantong)Co. , Ltd.\]

Abstract:For the practical die casting aluminum alloy steering gear, JSCAST software was adopted to simulate the filling and solidification process, and through computed tomography (CT) scanning experiment, the characteristics, size and distribution of microporosity in the castings were analyzed and compared with the simulation ones.The results show that the holes in the steering gear mainly are small size,and the diameter defined as a sphere of an equal volume is between 0.261 and 0.288 mm. Gasshrinkage pore and shrinkage pore have a larger size , mainly distributed in the bigger thickness casting of two mounting holes and the connection of rack and pinion shaft with complex shape. The intermediate positions of steer gear generate a large number of gas pores as a result of the convergence of liquid metal.

Key Words: Die-casting ADC12, Numerical Simulation, 3D X-ray Tomography, Microporosity

相关文章



设为首页 | 加入收藏 | 访问统计

版权所有:《特种铸造及有色合金》杂志社(武汉) 电话:027-85358206 027-85486024 传真:027-8535812 备案信息:鄂ICP备15003736号 网站建设武汉网户

鄂公网安备 42010302000230号