Influence of Alumina on Modifier Strontium in Molten A356 Alloy

Views : 0 下载量: 100 CSCD: 0

Export
Share
Collection
Album

Influence of Alumina on Modifier Strontium in Molten A356 Alloy
Issue S1, Pages: 77-79(2007)
Published：2007
DOI：
稿件说明：

移动端阅览

[1]葛学元,李建国,谭红艳,何迁.A356合金熔体中Al_2O_3夹杂对变质剂Sr的影响[J].特种铸造及有色合金,2007(S1):77-79. DOI：

Ge Xueyuan Li Jianguo Tan Hongyan He Qian. Influence of Alumina on Modifier Strontium in Molten A356 Alloy[J]. Special Casting & Nonferrous Alloys, 2007, (S1): 77-79. DOI：

摘要

通过XRD、SEM等分析手段研究了A356合金熔体中Al2O3夹杂与变质剂Sr之间所发生的反应及其反应机制

结果发现Sr可以与Al2O3经过一系列反应生成Sr-Al-O化合物

由此造成了Sr的损耗

生成的Sr-Al-O化合物可溶于水。在Al-Si合金熔体中加入Sr后

游离态的Sr与Si会首先生成SrSi2

而后在熔体中发生三元共晶反应

生成的Al2Si2Sr化合物呈块状或条状分布。研究还发现存在Al-Si-O化合物

它覆在Al2Si2Sr化合物表面。

Abstract

The mechanism of the reactions between alumina and modifier strontium in molten A356 alloy have been investigated

by means of XRD and SEM.The results showed that there have been a series of reactions between them

forming the kind of compounds Sr-Al-O

which are water-soluble

and this led to the consumption of strontium.When adding strontium into the molten Al-Si alloys

the SrSi2 would form firstly

and then the Al2Si2Sr compound formed through ternary eutectic reaction

which appeared in the shape of both bulk and strip.The Al-Si-O compound was also found which laid over the Al2Si2Sr compound.

关键词

Keywords

references

Alert me when the article has been cited

提交

相关文章

Effects of Sc on Microstructure and Properties of As-cast A356 Aluminum Alloy

Effects of Trace Sr on Microstructure and Mechanical Properties of Al-Si-Mg Alloy

Composition and Structure of Upper Fatigue Section in A356 Low-pressure Casting Parts

Interaction between Mn and Sr Elements in Al-7Si-0.2Fe Alloy

Effects of Sr and Ultrasound on Solidified Structure and Mechanical Properties of Iron-rich A356 Alloy

相关作者

TANG Jiangtao 沈阳化工大学材料工程与科学学院;中国科学院金属研究所中国科学院核用材料与安全评价重点实验室;中国科学院金属研究所师昌绪创新材料研究中心

FENG Li 沈阳职业技术学院电气工程学院

JIANG Yuefeng 中国科学院金属研究所中国科学院核用材料与安全评价重点实验室;中国科学院金属研究所师昌绪创新材料研究中心

LIANG Tian 中国科学院金属研究所中国科学院核用材料与安全评价重点实验室;中国科学院金属研究所师昌绪创新材料研究中心

MA Yingche 中国科学院金属研究所中国科学院核用材料与安全评价重点实验室;中国科学院金属研究所师昌绪创新材料研究中心

ZOU Bin 中国航发贵州红林航空动力控制科技有限公司

LIANG Qiuxian 广东辉煌金属制品有限公司

SU Zaijun 广东辉煌金属制品有限公司;广州科技贸易职业学院智能制造学院

相关机构

School of Electrical Engineering， Shenyang;Polytechnic College

Master Changxu Innovative Materials Research Center， Institute of Metal Research， Chinese Academy of Sciences

Key Laboratory of Nuclear Materials and Safety Evaluation， Institute of Metal， Chinese Academy of Sciences

School of Materials Engineering and Science， Shenyang University of Chemical Technology

College of Materials and Advanced Manufacturing， Hunan University of Technology

⁰